Disclaimer
How to change rear coil springs on VW Polo Saloon (9A4, 9A2, 9N2, 9A6) – replacement guide
downloads:
0
Views:
7
Important!
This replacement procedure can be used for:
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 … View more
The steps may slightly vary depending on the car design.
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Springs for Polo Saloon (9A4, 9A2, 9N2, 9A6) and other VW models
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Combination spanner #16
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: coil springs – VW POLO Saloon (9A4). AUTODOC experts recommend:
- Both coil springs of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right coil springs of the rear suspension.
- All work should be done with the engine stopped.
Replacement: coil springs – VW POLO Saloon (9A4). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VW POLO Saloon (9A4) - Step 5
Remove the wheel. - Step 6
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 8
Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the fastening bolt. - Step 10
Remove the mounting from under the rear axle beam.Replacement: coil springs – VW POLO Saloon (9A4). Tip:Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms. - Step 11
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 12
Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. - Step 13
Remove the fastening bolt. - Step 14
Remove the mounting from under the rear axle beam.AUTODOC recommends:VW POLO Saloon (9A4) – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car. - Step 15
Remove the spring. Use a crowbar.AUTODOC recommends:Inspect the rubber mounts of the suspension spring. Replace if necessary. - Step 16
Clean the coil spring mounting seats. Use a wire brush. Use WD-40 spray. - Step 17
Install the coil spring together with the rubber mounts into the mounting seats. - Step 18
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 19
Install the fastening bolt.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo IV Saloon (9A4, 9A2, 9N2, 9A6) model
Popular maintenance tutorials for VW Polo 9A4
Complete guides for changing the Springs on different VW POLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Polo Saloon (9A4, 9A2, 9N2, 9A6)
View more
What causes engine misfire? | AUTODOC
7 signs of faulty fuel injectors | AUTODOC tips
Why Is the Windscreen Washer Not Spraying? Solution
How to choose the right engine oil for your car | AUTODOC
Most commonly replaced car parts on VW POLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























