
Disclaimer
How to change rear shock absorbers on VW Polo IV Saloon (9A4, 9A2, 9N2, 9A6) – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 … View more
The steps may slightly vary depending on the car design.
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 TDi, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 TDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.9 SDI, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for Polo Saloon (9A4, 9A2, 9N2, 9A6) and other VW models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 15
Drive socket # 16
Combination spanner #16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Vice
Shock absorber socket
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – VW POLO Saloon (9A4). Professionals recommend:
- Both shock absorbers of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- All work should be done with the engine stopped.
Replacement: shock absorbers – VW POLO Saloon (9A4). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. - Step 8
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 9
Remove the fastening bolt. - Step 10
Remove the mounting from under the rear axle beam.Replacement: shock absorbers – VW POLO Saloon (9A4). Tip:Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms. - Step 11
Unscrew the upper fastener of the shock absorber. Use a drive socket #16. Use a ratchet wrench.Replacement: shock absorbers – VW POLO Saloon (9A4). Tip from AUTODOC experts:To avoid injuries, hold the shock absorber when undoing the fastening bolts. - Step 12
Remove the shock absorber. - Step 13
Grip the shock absorber in a vice. - Step 14
Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray. - Step 15
Remove the shock absorber piston rod fastening. Use a drive socket #15. Use a ratchet wrench. - Step 16
Remove the shock absorber mount, boot and bump stop.Replacement: shock absorbers – VW POLO Saloon (9A4). AUTODOC experts recommend:Examine the shock absorber dust cap and the bump stop. Replace them if necessary. Before installing a new shock absorber you should pump it manually 3-5 times. - Step 17
Install the mount, boot and bump stop onto a new shock absorber. - Step 18
Screw the shock strut piston rod upper fastening. Use a drive socket #15. Use a shock absorber socket. Use a torque wrench. Tighten it to 25 Nm torque. - Step 19
Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo IV Saloon (9A4, 9A2, 9N2, 9A6) model
Popular maintenance tutorials for VW Polo 9A4
Complete guides for changing the Shock absorbers on different VW POLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Polo Saloon (9A4, 9A2, 9N2, 9A6)
View more
Three ways to change oil without a lift
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
What to do if your car’s bonnet won’t open | AUTODOC tips
Most commonly replaced car parts on VW POLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

































