How to carry out replacement: Brake Pads 2.2 20V Turbo quattro Audi 200 Avant
Disclaimer
Change Audi 200 Avant 2.3 Brake Pads yourself – manuals and video tutorials

How to change rear brake pads on AUDI 200 C3 Avant (44, 44Q) – replacement guide

downloads: 0
Views: 8
Download your free tutorial and fix AUDI 200 Avant (44, 44Q) 2.1 Turbo quattro problems yourself Download for free 2.34 MB Brake Pads for Audi 200 Avant Shop now
Leave a comment Open in a new tab
When to replace the Brake Pads on your AUDI 200
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
AUDI 200 Avant (44, 44Q) 2.1 Turbo quattro, AUDI 200 Avant (44, 44Q) 2.2 Turbo quattro, AUDI 200 Avant (44, 44Q) 2.2 20V Turbo quattro, AUDI 200 Avant (44, 44Q) 2.2 Turbo quattro, AUDI 200 Avant (44, 44Q) 2.2 Turbo … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Pads for 200 Avant (44, 44Q) and other AUDI models
How to change Brake pad set on Audi 200 Avant 2.2 20V Turbo quattro – step-by-step instructions for straightforward car repair Brake pad set
How to change Brake pad set on AUDI 200 Avant (44, 44Q) 2.1 Turbo quattro – tips for proper car maintenance
Brake pad set for AUDI 200 Avant (44, 44Q) 2.1 Turbo quattro Petrol (182 hp)
Simple DIY car repair steps – Replacing Brake pad set on AUDI 200 Avant (44, 44Q) 2.2 Turbo quattro
Brake pad set for AUDI 200 Avant (44, 44Q) 2.2 Turbo quattro Petrol (165 hp)
Easy tricks to help you to replace Brake pad set on AUDI 200 Avant (44, 44Q) 2.2 20V Turbo quattro
Brake pad set for AUDI 200 Avant (44, 44Q) 2.2 20V Turbo quattro Petrol (220 hp)
Brake pad set removal & installation, incredibly easy steps for AUDI 200 Avant (44, 44Q) 2.2 Turbo quattro
Brake pad set for AUDI 200 Avant (44, 44Q) 2.2 Turbo quattro Petrol (200 hp)
Changing Brake pad set on AUDI 200 Avant (44, 44Q) 2.2 Turbo – tips for first time repair
Brake pad set for AUDI 200 Avant (44, 44Q) 2.2 Turbo Petrol (165 hp)
Tools
Replacement: brake pads – AUDI 200 Avant (44, 44Q). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Anti-squeal paste
High-temperature ceramic grease
Torque wrench
Combination spanner #13
Combination spanner #15
Wheel impact socket #17
Brake caliper wind back tool
Ratchet wrench
Crow bar
Wheel chock
Buy tools
Replacement: brake pads – AUDI 200 Avant (44, 44Q). Tip from AUTODOC:
  • Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
  • The replacement procedure is identical for all brake pads on the same axle.
  • All work should be done with the engine stopped.
Replacement: brake pads – AUDI 200 Avant (44, 44Q). Recommended sequence of steps:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    How to change Brake Pads on Audi 200 Avant 1983 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 3
    How to replace AUDI 200 Avant (44, 44Q) 2.2 20V Turbo quattro 1984 Brake Pads - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 4
    Raise the rear of the car and secure on supports.
    Step 5
    Audi 200 Avant 2.2 Turbo quattro 1985 Brake Pads replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. AUDI 200 Avant (44, 44Q)
  4. Step 6
    Changing Brake Pads on AUDI 200 Avant (44, 44Q) 2.3 1986 by yourself
    Remove the wheel.
  5. Step 7
    Clean the brake caliper fasteners. Use a wire brush. Use a brake cleaner.
    Step 8
    How to remove AUDI 200 2.2 Turbo 1987 Brake Pads - online easy-to-follow instructions
    Unscrew the brake caliper fastening. Use a combination spanner #15. Use a combination spanner #13.
  6. Step 9
    How to replace Brake Pads on AUDI 200 Avant (44, 44Q) 1988: download PDF manuals and video instructions
    Spread the brake pads. Use a crowbar.
  7. Step 10
    How hard is it to do yourself: Brake Pads replacement on Audi 200 Avant 2.2 Turbo quattro 1989 - download illustrated guide
    Remove the brake caliper.
    Replacement: brake pads – AUDI 200 Avant (44, 44Q). Tip:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  8. Step 11
    Need to know how to renew Brake Pads on AUDI 200 1990? This free workshop manual will help you to do it yourself
    Remove the brake pads.
    Replacement: brake pads – AUDI 200 Avant (44, 44Q). AUTODOC experts recommend:
    Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
  9. Step 12
    Changing of Brake Pads on Audi 200 Avant 1991 won't be an issue if you follow this illustrated step-by-step guide
    Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
  10. Step 13
    AUDI 200 2.3 Brake Pads replacement: online guides and video tutorials
    Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
    Replacement: brake pads – AUDI 200 Avant (44, 44Q). Tip from AUTODOC experts:
    Make sure the disc surface is clean before installing the pads.
  11. Step 14
    Replacing Brake Pads on Audi 200 Avant 1984 2.2 20V Turbo quattro by yourself
    Install new brake pads.
    Replacement: brake pads – AUDI 200 Avant (44, 44Q). AUTODOC recommends:
    Make sure the pads are installed with linings facing the disc.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0

Popular maintenance tutorials for Audi 200 Avant

More manuals for Audi 200 Avant

Complete guides for changing the Brake pad set on different AUDI 200 models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI 200 Avant (44, 44Q) Brake Pads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI 200 Avant (44, 44Q) Brake Pads replacement - online guide
Tips & tricks for your AUDI 200 Avant (44, 44Q)
View more
  • How to change Brake pad set on AUDI 200 Avant (44, 44Q) 2.1 Turbo quattro - replacement tricks
    How to check your head gasket | AUTODOC
    4K views
    Published on: 03/12/2020
  • Changing Disc pads Audi 200 Avant 2.2 20V Turbo quattro - Replacement Tips
    How to remove scratches from a car | AUTODOC tips
    7K views
    Published on: 12/05/2022
  • Maintenance Hacks - AUDI 200 Avant (44, 44Q) 2.2 Turbo quattro Brake pad kit replacement guide
    Things you should never do with an automatic transmission | AUTODOC tips
    6K views
    Published on: 26/01/2021
  • Replace Disc brake pads on Audi 200 Avant - free video tips
    How to reduce fuel consumption | AUTODOC
    4K views
    Published on: 27/09/2022

Most commonly replaced car parts on AUDI 200

Professional manuals for the most common AUDI models