Disclaimer
How to change rear anti roll bar links on Lexus RX XU30 – replacement guide
downloads:
3
Views:
24
Important!
This replacement procedure can be used for:
LEXUS RX (MHU3_, GSU3_, MCU3_) 300 (MCU35_), LEXUS RX (MHU3_, GSU3_, MCU3_) 400h (MHU38_), LEXUS RX (MHU3_, GSU3_, MCU3_) 400h AWD (MHU38_), LEXUS RX (MHU3_, GSU3_, MCU3_) 350 AWD (GSU35_), LEXUS RX (MHU3_, GSU3_, MCU3_) 330 AWD (MCU38), LEXUS RX (MHU3_, GSU3_, MCU3_) 330 (MCU38_), LEXUS RX (MHU3_, GSU3_, MCU3_) 400h AWD (MHU38_), LEXUS RX (MHU3_, GSU3_, MCU3_) 350 (GSU30_) … View more
The steps may slightly vary depending on the car design.
LEXUS RX (MHU3_, GSU3_, MCU3_) 300 (MCU35_), LEXUS RX (MHU3_, GSU3_, MCU3_) 400h (MHU38_), LEXUS RX (MHU3_, GSU3_, MCU3_) 400h AWD (MHU38_), LEXUS RX (MHU3_, GSU3_, MCU3_) 350 AWD (GSU35_), LEXUS RX (MHU3_, GSU3_, MCU3_) 330 AWD (MCU38), LEXUS RX (MHU3_, GSU3_, MCU3_) 330 (MCU38_), LEXUS RX (MHU3_, GSU3_, MCU3_) 400h AWD (MHU38_), LEXUS RX (MHU3_, GSU3_, MCU3_) 350 (GSU30_) … View more
The steps may slightly vary depending on the car design.
How to change rear anti roll bar link / rear drop link on LEXUS RX400h 2 (XU30) [TUTORIAL AUTODOC]
All the parts you need to replace – Anti Roll Bar Links for RX (MHU3_, GSU3_, MCU3_) and other LEXUS models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 17
Wheel impact socket #21
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on Lexus RX XU30 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – Lexus RX XU30. Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3
Raise the rear of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. Lexus RX XU30 - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a drive socket #17. Use a ratchet wrench. - Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – Lexus RX XU30. AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the LEXUS RX II (XU30) model
Popular maintenance tutorials for Lexus RX XU30
Free download PDF
1.64 MB
Free download PDF1.26 MB
Free download PDF1.81 MB
Free download PDF2.1 MB
Free download PDF2.08 MB
Free download PDF2.48 MB
Complete guides for changing the Drop links on different LEXUS RX models
- Free download PDF1.26 MB
Free download PDF1.25 MB
Free download PDF1.26 MB
Free download PDF972.8 KB
Free download PDF1.23 MB
Free download PDF1.23 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your LEXUS RX (MHU3_, GSU3_, MCU3_)
View more
How to tell if a tie rod is faulty
How I started restoring a driveshaft | Drivetrain restoration – Part 1
DIY rear axle restoration | Drivetrain restoration – Part 2
Three ways to change oil without a lift
Most commonly replaced car parts on LEXUS RX
Time to replace parts? Get even better deals in our Shop app.
SCAN ME