Disclaimer
How to change rear anti roll bar links on LEXUS ES VI (XV60) – replacement guide
downloads:
8
Views:
62
Important!
This replacement procedure can be used for:
LEXUS ES (_V6_) 350 4WD (GSV60_), LEXUS ES (_V6_) 350 (GSV60_), LEXUS ES (_V6_) 350 (GSV60_), LEXUS ES (_V6_) 300h (ASV60_, AVV60_), LEXUS ES (_V6_) 250 (AVV60_, ASV60_) … View more
The steps may slightly vary depending on the car design.
LEXUS ES (_V6_) 350 4WD (GSV60_), LEXUS ES (_V6_) 350 (GSV60_), LEXUS ES (_V6_) 350 (GSV60_), LEXUS ES (_V6_) 300h (ASV60_, AVV60_), LEXUS ES (_V6_) 250 (AVV60_, ASV60_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for ES (_V6_) and other LEXUS models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 17
Wheel impact socket #21
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on LEXUS ES (AVV6_, GSV6_, ASV6_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – LEXUS ES (AVV6_, GSV6_, ASV6_). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. LEXUS ES (AVV6_, GSV6_, ASV6_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a drive socket #17. Use a ratchet wrench. - Step 8Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – LEXUS ES (AVV6_, GSV6_, ASV6_). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the LEXUS ES VI (XV60) model
Popular maintenance tutorials for ES XV60
Complete guides for changing the Drop links on different LEXUS ES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your LEXUS ES (_V6_)
View more
How to repair a bumper yourself | AUTODOC tips
How to align the timing marks correctly on an EA888 engine
DIY brake caliper restoration | AUTODOC tips
3 essential tips for choosing summer tyres | Get ready for warmer weather
Most commonly replaced car parts on LEXUS ES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



















