How to carry out replacement: Anti Roll Bar Links 450h AWD (GYL25_, GYL26_, GYL25, GYL26) LEXUS RX (_L2_)
Disclaimer
Change LEXUS RX (_L2_) 200t 4WD (AGL25_) Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on LEXUS RX IV (AL20) – replacement guide

downloads: 4
Views: 31
Download your free tutorial and fix LEXUS RX (_L2_) 350 4WD (GGL25_) problems yourself Download for free 1.26 MB Anti Roll Bar Links for LEXUS RX (_L2_) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
LEXUS RX (_L2_) 200t (AGL20_), LEXUS RX (_L2_) 200t AWD (AGL25_), LEXUS RX (_L2_) 350 4WD (GGL25_, GGL26_), LEXUS RX (_L2_) 450h AWD (GYL25_, GYL26_, GYL25, GYL26), LEXUS RX (_L2_) 450h (GYL20_), LEXUS RX (_L2_) 350 4WD (GGL25_), LEXUS RX (_L2_) 200t (AGL20_), LEXUS RX (_L2_) 200t 4WD (AGL25_), LEXUS RX (_L2_) 350 (GGL20_), LEXUS RX (_L2_) 350 4WD (GGL25_), LEXUS RX (_L2_) 350 (GGL20_), LEXUS RX (_L2_) 350 4WD (GGL25_), LEXUS RX (_L2_) 300 (AGL20_), LEXUS RX (_L2_) 300 AWD (AGL25_), LEXUS RX (_L2_) 300 AWD (AGL25_), LEXUS RX (_L2_) 350 4WD (GGL25_), LEXUS RX (_L2_) 350 (GGL25_), LEXUS RX (_L2_) 350 4WD (GGL25, GGL26), LEXUS RX (_L2_) 300 (AGL20_), LEXUS RX (_L2_) 300 AWD (AGL25_) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for RX (_L2_) and other LEXUS models
Alternative products
How to change Anti-roll bar link on LEXUS RX (_L2_) 450h AWD (GYL25_, GYL26_, GYL25, GYL26) – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – LEXUS RX (_L2_). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #19
Drive socket # 17
Drive socket # 19
Wheel impact socket #21
Ratchet wrench
Torque wrench
Wheel chock
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on LEXUS RX (_L2_) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – LEXUS RX (_L2_). Recommended sequence of steps:
  1. Step 1
    How to change Anti Roll Bar Links on LEXUS RX (_L2_) 2015 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace LEXUS RX (_L2_) 450h AWD (GYL25_, GYL26_, GYL25, GYL26) 2016 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    LEXUS RX (_L2_) 3.5 450h 2017 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. LEXUS RX (_L2_)
  4. Step 5
    Changing Anti Roll Bar Links on LEXUS RX (_L2_) 200t AWD (AGL25_) 2018 by yourself
    Remove the wheel.
  5. Step 6
    How to remove LEXUS RX 3.5 2019 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on LEXUS RX (_L2_) 2020: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17 (2 pieces).
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on LEXUS RX (_L2_) 450h (GYL20_) 2021 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on LEXUS RX 2022? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – LEXUS RX (_L2_). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
    Step 11
    Changing of Anti Roll Bar Links on LEXUS RX (_L2_) 2023 won't be an issue if you follow this illustrated step-by-step guide
    Install a new rod, tighten the fasteners. Use a combination spanner #19. Use a drive socket #19. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the LEXUS RX IV (AL20) model

LEXUS RX (_L2_) tyre size

Popular maintenance tutorials for LEXUS RX (_L2_)

More manuals for LEXUS RX (_L2_)

Complete guides for changing the Drop links on different LEXUS RX models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY LEXUS RX (_L2_) Anti Roll Bar Links replacement - online guide
Tips & tricks for your LEXUS RX (_L2_)
View more
  • How to change Drop links on LEXUS RX (_L2_) 200t (AGL20_) - replacement tricks
    Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
    6K views
    Published on: 20/10/2020
  • Changing Stabilizer link LEXUS RX (_L2_) 450h AWD (GYL25_, GYL26_, GYL25, GYL26) - Replacement Tips
    How to repair a bumper yourself | AUTODOC tips
    19K views
    Published on: 01/06/2023
  • Maintenance Hacks - LEXUS RX (_L2_) 3.5 450h Sway bar link replacement guide
    What to do if your car’s bonnet won’t open | AUTODOC tips
    19K views
    Published on: 12/09/2024
  • Replace Drop link on LEXUS RX (_L2_) - free video tips
    5 possible reasons why your car heater isn't working
    7K views
    Published on: 21/11/2024

Most commonly replaced car parts on LEXUS RX

Professional manuals for the most common LEXUS models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
LEXUS RX (_L2_) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME