How to change pollen filter on FORD B-MAX (JK) – replacement guide
downloads:
7
Views:
90
0
Users voted – 0
Recommended replacement interval for the part category Pollen filter : 1year / 20000km
Important!
This replacement procedure can be used for:
FORD B-MAX (JK) 1.0 EcoBoost,
FORD B-MAX (JK) 1.0 EcoBoost,
FORD B-MAX (JK) 1.6 Ti,
FORD B-MAX (JK) 1.6 TDCi,
FORD B-MAX (JK) 1.4,
FORD B-MAX (JK) 1.5 TDCi,
FORD B-MAX (JK) 1.0 EcoBoost,
FORD B-MAX (JK) 1.4 LPG,
FORD B-MAX (JK) 1.4 LPG,
FORD B-MAX (JK) 1.5 TDCi,
FORD B-MAX (JK) 1.0 EcoBoost
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Pollen Filter for B-MAX (JK) and other FORD models
Replacement: pollen filter – FORD B-MAX (JK). Tip from AUTODOC:
Replace the cabin filter at least once every six months, in early spring and autumn seasons.
Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
Warning! Shut down the engine before starting any work – FORD B-MAX (JK).
Carry out replacement in the following order:
Step 1
Move the passenger seat fully backwards.
Step 2
Remove the clips of the bottom trim panel. Use a clip removal tool.
Step 3
Remove the bottom cover of the glove box.
Step 4
Remove the clips from the plastic side panel. Use a clip removal tool.
Step 5
Remove the side plastic cover.
Step 6
Unscrew the fasteners of the cabin filter housing cover. Use Torx T20. Use a ratchet wrench.
Step 7
Remove the cabin filter housing cover.
AUTODOC recommends:
Replacement: pollen filter – FORD B-MAX (JK). Do not use excessive force when removing the part as this may damage it.
Step 8
Remove the cabin filter.
Replacement: pollen filter – FORD B-MAX (JK). AUTODOC experts recommend:
Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car.
Step 9
Install the cabin filter to its mounting seat.
AUTODOC recommends:
Replacement: pollen filter – FORD B-MAX (JK). Be sure to position the filtering element correctly. Avoid misalignment.Follow the air flow direction arrow on the filter.FORD B-MAX (JK) – It's important to only use high-quality filters.
Step 10
Reinstall the cabin filter housing cover. Make sure you hear a click indicating that it is locked in place.
AUTODOC recommends:
Replacement: pollen filter – FORD B-MAX (JK). Do not use excessive force during installation. This may damage the fasteners.
Step 11
Screw in the fasteners of the cabin filter housing cover. Use Torx T20. Use a ratchet wrench.
Step 12
Install the side plastic panel.
Step 13
Reinstall the clips of the plastic side panel.
Step 14
Install the glove box bottom cover.
Step 15
Install the clips of the bottom trim panel.
Step 16
Return the passenger seat to its initial position.
Step 17
Switch on the ignition.
Step 18
Switch on the air conditioning system. This is necessary in order to make sure that the component operates properly.
Step 19
Switch off the ignition.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your FORD B-MAX (JK)
View more
How to remove rust | AUTODOC tips
Petrol or diesel? What's the difference between these engines? | AUTODOC
5 tools that make car repair incredibly simple | AUTODOC tips
Top 5 reasons why the suspension knocks | AUTODOC tips