Disclaimer
How to change mass air flow sensor on MERCEDES-BENZ C-Class T-modell (S202) – replacement guide
downloads:
3
Views:
154
Important!
This replacement procedure can be used for:
MERCEDES-BENZ C-Class T-modell (S202) C 240 T (202.088), MERCEDES-BENZ C-Class T-modell (S202) C 280 T (202.089), MERCEDES-BENZ C-Class T-modell (S202) C 240 T (202.086) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ C-Class T-modell (S202) C 240 T (202.088), MERCEDES-BENZ C-Class T-modell (S202) C 280 T (202.089), MERCEDES-BENZ C-Class T-modell (S202) C 240 T (202.086) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Mass Air Flow Sensor for C-Class T-modell (S202) and other MERCEDES-BENZ models
Alternative products

Electronic spray
Crow bar
Microfibre towel
Fender cover
Replacement: mass air flow sensor – MERCEDES-BENZ C-CLASS Estate (S202). AUTODOC experts recommend:
- Сlear the trouble codes from the electronic control unit if necessary.
- Make sure that no dust or dirt gets into the air duct components and the throttle body.
- All work should be done with the engine stopped.
Replacement: mass air flow sensor – MERCEDES-BENZ C-CLASS Estate (S202). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.AUTODOC recommends:Replacement: mass air flow sensor – MERCEDES-BENZ C-CLASS Estate (S202). Do not use excessive force when removing the part as this may damage it. - Step 4
Remove the air intake hoses. - Step 5
Clean the air filter cover and housing. - Step 6
Remove the air filter housing.AUTODOC recommends:Replacement: mass air flow sensor – MERCEDES-BENZ C-CLASS Estate (S202). Do not use excessive force when removing the part as this may damage it. - Step 7
Detach the mass air flow sensor connector. - Step 8
Release the mass air flow sensor retaining clips. Use a crowbar. - Step 9
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 10
Clean the mounting seat of the mass air flow sensor. - Step 11
Remove the microfibre towel from the throttle body. - Step 12
Release the mass air flow sensor retaining clips. Use a crowbar. - Step 13
Remove the mass air flow sensor. - Step 14
Install a new mass air flow sensor. Make sure you hear a click indicating that it is locked in place.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class T-modell (S202) model
Popular maintenance tutorials for Mercedes S202
Complete guides for changing the MAF sensor on different MERCEDES-BENZ C-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ C-Class T-modell (S202)
View more
Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
What to do if your check engine light is on | AUTODOC tips
How to remove scratches from car plastic | AUTODOC tips
Why Is the Windscreen Washer Not Spraying? Solution
Most commonly replaced car parts on MERCEDES-BENZ C-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























