When to replace the Lambda Sensor on your VAUXHALL OMEGA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VAUXHALL Omega (B) Saloon (V94) 2.2 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Omega (B) Saloon (V94) and other VAUXHALL models
Alternative products
How to change Lambda sensor on VAUXHALL OMEGA (B) 3.2 V6 – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – VAUXHALL OMEGA (B). List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – VAUXHALL OMEGA (B). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VAUXHALL OMEGA (B) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on VAUXHALL OMEGA (B) 1993 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace VAUXHALL Omega (B) Saloon (V94) 3.2 V6 1994 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    VAUXHALL OMEGA (B) 3.0 V6 1995 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on VAUXHALL Omega (B) Saloon (V94) 2.6 V6 1996 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove VAUXHALL OMEGA 2.0 16V 1997 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on VAUXHALL Omega (B) Saloon (V94) 1998: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Omega (B) Saloon (V94) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VAUXHALL Omega (B) Saloon (V94) Lambda Sensor replacement - online guide
Tips & tricks for your VAUXHALL Omega (B) Saloon (V94)
View more
  • How to change Oxygen sensor on VAUXHALL Omega (B) Saloon (V94) 2.2 16V - replacement tricks
    5 mistakes when replacing consumables
  • Changing O2 sensor VAUXHALL OMEGA (B) 3.2 V6 - Replacement Tips
    #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
  • Maintenance Hacks - VAUXHALL Omega (B) Saloon (V94) 3.0 V6 NOx sensor replacement guide
    Engine Overheating? Replace Your Cooling Fan to Fix It
  • Replace Lambda sensors on VAUXHALL OMEGA (B) - free video tips
    K2 ROTON wheel cleaner overview
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VAUXHALL Omega (B) Saloon (V94) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME