When to replace the Lambda Sensor on your VAUXHALL OMEGA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VAUXHALL Omega (B) Estate (V94) 2.2 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Omega (B) Estate (V94) and other VAUXHALL models
Tools
Replacement: lambda sensor – VAUXHALL OMEGA (B) Estate. List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – VAUXHALL OMEGA (B) Estate. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VAUXHALL OMEGA (B) Estate – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on VAUXHALL OMEGA (B) Estate 1993 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace VAUXHALL Omega (B) Estate (V94) 3.2 V6 1994 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    VAUXHALL OMEGA (B) Estate 2.2 16V 1995 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on VAUXHALL Omega (B) Estate (V94) 2.0 1996 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove VAUXHALL OMEGA 2.0 16V 1997 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on VAUXHALL Omega (B) Estate (V94) 1998: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Omega (B) Estate (V94) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VAUXHALL Omega (B) Estate (V94) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VAUXHALL Omega (B) Estate (V94) Lambda Sensor replacement - online guide
Tips & tricks for your VAUXHALL Omega (B) Estate (V94)
View more
  • How to change Oxygen sensor on VAUXHALL Omega (B) Estate (V94) 2.5 V6 - replacement tricks
    3 things that cause engine damage | AUTODOC tips
  • Changing O2 sensor VAUXHALL OMEGA (B) Estate 3.2 V6 - Replacement Tips
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Maintenance Hacks - VAUXHALL Omega (B) Estate (V94) 2.2 16V NOx sensor replacement guide
    How do EGR valves work? | AUTODOC
  • Replace Lambda sensors on VAUXHALL OMEGA (B) Estate - free video tips
    Top 5 reasons why your car squeals | AUTODOC Tips