How to carry out replacement: Lambda Sensor 1.4 VAUXHALL MERIVA Mk II (B)
Disclaimer
Change VAUXHALL MERIVA Mk II (B) 1.7 CDTi Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on VAUXHALL Meriva Mk II (B) (S10) – replacement guide

downloads: 27
Views: 558
Download your free tutorial and fix VAUXHALL Meriva Mk II (B) (S10) 1.4 problems yourself Download for free 808.96 KB Lambda Sensor for VAUXHALL MERIVA Mk II (B) Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your VAUXHALL MERIVA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VAUXHALL Meriva Mk II (B) (S10) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Meriva Mk II (B) (S10) and other VAUXHALL models
Alternative products
How to change Lambda sensor on VAUXHALL MERIVA Mk II (B) 1.4 – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – VAUXHALL MERIVA Mk II (B). List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – VAUXHALL MERIVA Mk II (B). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VAUXHALL MERIVA Mk II (B) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on VAUXHALL MERIVA Mk II (B) 2010 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace VAUXHALL Meriva Mk II (B) (S10) 1.4 2011 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    VAUXHALL MERIVA Mk II (B) 1.7 CDTi 2012 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on VAUXHALL Meriva Mk II (B) (S10) 1.7 CDTI 2013 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove VAUXHALL MERIVA 1.6 CDTi 2014 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on VAUXHALL Meriva Mk II (B) (S10) 2015: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Meriva Mk2 (B) (S10) model

VAUXHALL MERIVA Mk II (B) tyre size

Popular maintenance tutorials for VAUXHALL MERIVA Mk II (B)

More manuals for VAUXHALL MERIVA Mk II (B)

Complete guides for changing the Oxygen sensor on different VAUXHALL MERIVA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VAUXHALL Meriva Mk II (B) (S10) Lambda Sensor replacement - online guide
Tips & tricks for your VAUXHALL Meriva Mk II (B) (S10)
View more
  • How to change Oxygen sensor on VAUXHALL Meriva Mk II (B) (S10) 1.3 CDTI - replacement tricks
    Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
    8K views
    Published on: 12/05/2022
  • Changing O2 sensor VAUXHALL MERIVA Mk II (B) 1.4 - Replacement Tips
    DIY car soundproofing | AUTODOC tips
    104K views
    Published on: 15/04/2021
  • Maintenance Hacks - VAUXHALL Meriva Mk II (B) (S10) 1.7 CDTi NOx sensor replacement guide
    TOP 5 mistakes during DIY oil change | AUTODOC tips
    36K views
    Published on: 17/06/2021
  • Replace Lambda sensors on VAUXHALL MERIVA Mk II (B) - free video tips
    Top 7 signs of a bad starter
    4K views
    Published on: 20/03/2025

Most commonly replaced car parts on VAUXHALL MERIVA

Professional manuals for the most common VAUXHALL models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VAUXHALL Meriva Mk II (B) (S10) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME