How to carry out replacement: Lambda Sensor 1.4 VAUXHALL CASCADA Convertible
Disclaimer
Change VAUXHALL CASCADA Convertible 1.6 Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on VAUXHALL Cascada Convertible (W13) – replacement guide

downloads: 0
Views: 19
Download your free tutorial and fix VAUXHALL Cascada Convertible (W13) 2.0 CDTI problems yourself Download for free 808.96 KB Lambda Sensor for VAUXHALL CASCADA Convertible Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your VAUXHALL CASCADA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VAUXHALL Cascada Convertible (W13) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Cascada Convertible (W13) and other VAUXHALL models
How to change Lambda sensor on VAUXHALL CASCADA Convertible 1.4 – step-by-step instructions for straightforward car repair Lambda sensor
How to change Lambda sensor on Cascada Convertible (W13) – tips for proper car maintenance
Lambda sensor for Cascada Convertible (W13) Petrol (140 hp)
Tools
Replacement: lambda sensor – VAUXHALL CASCADA Convertible. List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – VAUXHALL CASCADA Convertible. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VAUXHALL CASCADA Convertible – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on VAUXHALL CASCADA Convertible 2013 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace VAUXHALL Cascada Convertible (W13) 1.4 2014 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    VAUXHALL CASCADA Convertible 2.0 CDTI 2015 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on VAUXHALL Cascada Convertible (W13) 1.4 2016 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove VAUXHALL CASCADA 2.0 CDTI 2017 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on VAUXHALL Cascada Convertible (W13) 2018: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Cascada Convertible (W13) model.

Browse tyres

Popular maintenance tutorials for VAUXHALL CASCADA Convertible

More manuals for VAUXHALL CASCADA Convertible

Complete guides for changing the Oxygen sensor on different VAUXHALL CASCADA models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VAUXHALL Cascada Convertible (W13) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VAUXHALL Cascada Convertible (W13) Lambda Sensor replacement - online guide
Tips & tricks for your VAUXHALL Cascada Convertible (W13)
View more
  • How to change Oxygen sensor on VAUXHALL Cascada Convertible (W13) 1.6 - replacement tricks
    How to reduce fuel consumption | AUTODOC
    4K views
    Published on: 27/09/2022
  • Changing O2 sensor VAUXHALL CASCADA Convertible 1.4 - Replacement Tips
    Top 5 mistakes when buying car parts
    3K views
    Published on: 10/03/2022
  • Maintenance Hacks - VAUXHALL Cascada Convertible (W13) 2.0 CDTI NOx sensor replacement guide
    How to remove scratches from car plastic | AUTODOC tips
    101K views
    Published on: 15/12/2022
  • Replace Lambda sensors on VAUXHALL CASCADA Convertible - free video tips
    Top 6 products for enhancing your car | AUTODOC tips
    3K views
    Published on: 18/11/2021

Most commonly replaced car parts on VAUXHALL CASCADA

Professional manuals for the most common VAUXHALL models