When to replace the Lambda Sensor on your SKODA SUPERB
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
SKODA SUPERB (3U4) 1.8 T View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for SUPERB (3U4) and other SKODA models
Tools
Replacement: lambda sensor – SKODA SUPERB (3U4). List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Thread tap
Ratchet wrench
Replacement: lambda sensor – SKODA SUPERB (3U4). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – SKODA SUPERB (3U4) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Lift the car using a jack or place it over an inspection pit.
    Step 2
    How to change Lambda Sensor on Skoda Superb 3u 2001 - free PDF and video manuals
    Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 3
    How to replace SKODA SUPERB (3U4) 1.9 TDI 2002 Lambda Sensor - step-by-step manuals and video guides
    Remove the oxygen sensor housing cover.
  3. Step 4
    Skoda Superb 3u 1.8 T 2003 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 5
    Changing Lambda Sensor on SKODA SUPERB (3U4) 2.5 TDI 2004 by yourself
    Disconnect the oxygen sensor wiring.
  5. Step 6
    How to remove SKODA SUPERB 2.8 V6 2005 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Lambda Sensor on SKODA SUPERB (3U4) 2006: download PDF manuals and video instructions
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Lambda Sensor replacement on Skoda Superb 3u 1.9 TDI 2007 - download illustrated guide
    Remove the oxygen sensor.
  8. Step 9
    Need to know how to renew Lambda Sensor on SKODA SUPERB 2008? This free workshop manual will help you to do it yourself
    Clean the thread to prepare it for installing a new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Superb I Saloon (3U4) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SKODA SUPERB (3U4) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SKODA SUPERB (3U4) Lambda Sensor replacement - online guide
Tips & tricks for your SKODA SUPERB (3U4)
View more
  • How to change Oxygen sensor on SKODA SUPERB (3U4) 2.0 TDI - replacement tricks
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Changing O2 sensor Skoda Superb 3u 1.9 TDI - Replacement Tips
    How to choose the right engine oil for your car | AUTODOC
  • Maintenance Hacks - SKODA SUPERB (3U4) 1.8 T NOx sensor replacement guide
    TOP 4 car cleaning products | AUTODOC tips
  • Replace Lambda sensors on Skoda Superb 3u - free video tips
    How to clean an engine bay | AUTODOC