
Disclaimer
How to change serpentine belt on SKODA SUPERB (3U4) – replacement guide
downloads:
3
Views:
85

Recommended replacement interval for the part category Serpentine belt : 60000 km
Important!
This replacement procedure can be used for:
SKODA SUPERB (3U4) 2.0, SKODA SUPERB (3U4) 1.8 T … View more
The steps may slightly vary depending on the car design.
SKODA SUPERB (3U4) 2.0, SKODA SUPERB (3U4) 1.8 T … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for SUPERB (3U4) and other SKODA models
Serpentine belt
Alternative products

Combination spanner #17
HEX bit No.H5
HEX bit No.H7
Ratchet wrench
Fender cover
AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – SKODA SUPERB (3U4). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the engine cover fastener. Use HEX No.H5. Use a ratchet wrench.
- Step 4Remove the engine cover.AUTODOC recommends:Replacement: serpentine belt – SKODA SUPERB (3U4). Do not use excessive force when removing the part as this may damage it.
- Step 5Lift the car using a jack or place it over an inspection pit.Step 6Loosen the fastener of the AC compressor belt tensioner pulley. Use HEX No.H7. Use a ratchet wrench.
- Step 7Remove the V belt.Replacement: serpentine belt – SKODA SUPERB (3U4). Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 8Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #17.
- Step 9Remove the V-ribbed belt.Replacement: serpentine belt – SKODA SUPERB (3U4). Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 10Return the tensioner pulley to its initial position.
- Step 11Install the V-ribbed belt.Step 12Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #17.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Superb I Saloon (3U4) model
Popular maintenance tutorials for Skoda Superb 3u
Complete guides for changing the Alternator belt on different SKODA SUPERB models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA SUPERB (3U4)
View more
- Why Is the Windscreen Washer Not Spraying? Solution
- The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
- 5 mistakes made when washing the engine | AUTODOC tips
- TOP 5 mistakes during DIY oil change | AUTODOC tips
Most commonly replaced car parts on SKODA SUPERB
Time to replace parts? Get even better deals in our Shop app.

SCAN ME