Disclaimer
How to change lambda sensor on SEAT Ibiza III Hatchback (6L) – replacement guide
downloads:
26
Views:
540
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
SEAT Ibiza III Hatchback (6L) 2.0, SEAT Ibiza III Hatchback (6L) 1.6, SEAT Ibiza III Hatchback (6L) 1.8 T FR, SEAT Ibiza III Hatchback (6L) 1.8 T Cupra R … View more
The steps may slightly vary depending on the car design.
SEAT Ibiza III Hatchback (6L) 2.0, SEAT Ibiza III Hatchback (6L) 1.6, SEAT Ibiza III Hatchback (6L) 1.8 T FR, SEAT Ibiza III Hatchback (6L) 1.8 T Cupra R … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Lambda Sensor for Ibiza III Hatchback (6L) and other SEAT models
Alternative products

Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Thread tap
Ratchet wrench
Replacement: lambda sensor – SEAT IBIZA IV (6L1). AUTODOC experts recommend:
- After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
- Before getting down to work, start the engine and let it warm up to operating temperature.
- Please note: all work on the car – SEAT IBIZA IV (6L1) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Lift the car using a jack or place it over an inspection pit.Step 2
Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench. - Step 3
Remove the oxygen sensor housing cover. - Step 4
Detach the oxygen sensor connector. - Step 5
Disconnect the oxygen sensor wiring. - Step 6
Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench. - Step 8
Remove the oxygen sensor. - Step 9
Clean the thread to prepare it for installing a new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Ibiza III Hatchback (6L) model
Popular maintenance tutorials for Seat Ibiza 6L
Complete guides for changing the Oxygen sensor on different SEAT IBIZA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Ibiza III Hatchback (6L)
View more
5 mistakes when replacing consumables
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
5 causes of turbocharger failure and how to avoid them
Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
Most commonly replaced car parts on SEAT IBIZA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























