Disclaimer
How to change lambda sensor on OPEL Corsa D Hatchback (S07) – replacement guide
downloads:
30
Views:
583
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
OPEL Corsa D Hatchback (S07) 1.4 (L08, L68), OPEL Corsa D Hatchback (S07) 1.2 (L08, L68), OPEL Corsa D Hatchback (S07) 1.2 (L08, L68), OPEL Corsa D Hatchback (S07) 1.4 (L08, L68), OPEL Corsa D Hatchback (S07) 1.2 LPG (L08, L68), OPEL Corsa D Hatchback (S07) 1.2 LPG (L08, L68), OPEL Corsa D Hatchback (S07) 1.4 LPG (L08, L68) … View more
The steps may slightly vary depending on the car design.
OPEL Corsa D Hatchback (S07) 1.4 (L08, L68), OPEL Corsa D Hatchback (S07) 1.2 (L08, L68), OPEL Corsa D Hatchback (S07) 1.2 (L08, L68), OPEL Corsa D Hatchback (S07) 1.4 (L08, L68), OPEL Corsa D Hatchback (S07) 1.2 LPG (L08, L68), OPEL Corsa D Hatchback (S07) 1.2 LPG (L08, L68), OPEL Corsa D Hatchback (S07) 1.4 LPG (L08, L68) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Lambda Sensor for Corsa D Hatchback (S07) and other OPEL models
Lambda sensor
Lambda sensor
Lambda sensor for Corsa D Hatchback (S07) Petrol (100 hp)
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – OPEL CORSA D. AUTODOC experts recommend:
- After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
- Before getting down to work, start the engine and let it warm up to operating temperature.
- Please note: all work on the car – OPEL CORSA D – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4
Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray. - Step 5
Detach the oxygen sensor connector. - Step 6
Unscrew the oxygen sensor fastener. Use a flare nut spanner #22. - Step 7
Remove the oxygen sensor. - Step 8
Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench. - Step 9Treat the oxygen sensor. Use high-temperature ceramic grease.Step 10
Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Corsa D Hatchback (S07) model.
Popular maintenance tutorials for Opel Corsa D
Free download PDF
1.93 MB
Free download PDF1.58 MB
Free download PDF1.25 MB
Free download PDF870.4 KB
Free download PDF1.68 MB
Free download PDF2.21 MB
Complete guides for changing the Oxygen sensor on different OPEL CORSA models
Free download PDF819.2 KB
Free download PDF798.72 KB
Free download PDF819.2 KB
Free download PDF1 MB
Free download PDF1.16 MB
Free download PDF1.02 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your OPEL Corsa D Hatchback (S07)
View more
Top 5 mistakes when working in the engine bay | AUTODOC tips
Why do your brakes squeak? | AUTODOC tips
How to repair a bumper yourself | AUTODOC tips
TOP 8 mistakes car owners make | AUTODOC tips
