When to replace the Lambda Sensor on your OPEL ANTARA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
OPEL ANTARA 2.4, OPEL ANTARA 2.4 4x4, OPEL ANTARA 2.4, OPEL ANTARA 2.4 4x4, OPEL ANTARA 2.4, OPEL ANTARA 2.4 LPG, OPEL ANTARA 2.4 LPG 4x4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for ANTARA and other OPEL models
Alternative products
How to change Lambda sensor on Opel Antara 07 2.0 CDTI 4x4 – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – OPEL ANTARA. List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – OPEL ANTARA. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – OPEL ANTARA – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on Opel Antara 07 2006 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace OPEL ANTARA 2.0 CDTI 4x4 2007 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    Opel Antara 07 2.2 CDTi 2008 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on OPEL ANTARA 2.0 CDTI 2009 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove OPEL ANTARA 3.2 V6 2010 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on OPEL ANTARA 2011: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Antara (L07) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY OPEL ANTARA Lambda Sensor replacement - online guide
Tips & tricks for your OPEL ANTARA
View more
  • How to change Oxygen sensor on OPEL ANTARA 2.2 CDTi 4x4 - replacement tricks
    How I started restoring a driveshaft | Drivetrain restoration – Part 1
  • Changing O2 sensor Opel Antara 07 2.0 CDTI 4x4 - Replacement Tips
    Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
  • Maintenance Hacks - OPEL ANTARA 2.2 CDTi NOx sensor replacement guide
    What to do if your car’s bonnet won’t open | AUTODOC tips
  • Replace Lambda sensors on Opel Antara 07 - free video tips
    Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC

Professional manuals for the most common OPEL models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
OPEL ANTARA Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME