When to replace the Lambda Sensor on your OPEL AGILA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
OPEL AGILA (B) (H08) 1.2 (F68), OPEL AGILA (B) (H08) 1.0 (F68), OPEL AGILA (B) (H08) 1.0 (F68), OPEL AGILA (B) (H08) 1.2 LPG (F68), OPEL AGILA (B) (H08) 1.0 LPG (F68), OPEL AGILA (B) (H08) 1.2 (F68) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: lambda sensor – OPEL AGILA (B) (H08). List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – OPEL AGILA (B) (H08). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – OPEL AGILA (B) (H08) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on OPEL Agila B 2008 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace OPEL AGILA (B) (H08) 1.2 (F68) 2009 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    OPEL Agila B 1.0 (F68) 2010 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on OPEL AGILA (B) (H08) 1.0 LPG (F68) 2011 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove OPEL AGILA 1.2 LPG (F68) 2012 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on OPEL AGILA (B) (H08) 2013: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Agila B (H08) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
OPEL AGILA (B) (H08) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY OPEL AGILA (B) (H08) Lambda Sensor replacement - online guide
Tips & tricks for your OPEL AGILA (B) (H08)
View more
  • How to change Oxygen sensor on OPEL AGILA (B) (H08) 1.3 CDTI (F68) - replacement tricks
    Headlight Restoration | AUTODOC tips
  • Changing O2 sensor OPEL Agila B 1.2 (F68) - Replacement Tips
    DIY car soundproofing | AUTODOC tips
  • Maintenance Hacks - OPEL AGILA (B) (H08) 1.0 (F68) NOx sensor replacement guide
    TOP 8 mistakes car owners make | AUTODOC tips
  • Replace Lambda sensors on OPEL Agila B - free video tips
    TOP 6 WD-40 lifehacks | AUTODOC tips

Professional manuals for the most common OPEL models