When to replace the Lambda Sensor on your MERCEDES-BENZ VANEO
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ VANEO (414) 1.6 (414.700), MERCEDES-BENZ VANEO (414) 1.6 (414.700), MERCEDES-BENZ VANEO (414) 1.9 (414.700) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for VANEO (414) and other MERCEDES-BENZ models
Tools
Replacement: lambda sensor – MERCEDES-BENZ VANEO (414). Tools you need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Drive socket # 8
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – MERCEDES-BENZ VANEO (414). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • All work should be done with the engine stopped.
Replacement: lambda sensor – MERCEDES-BENZ VANEO (414). Recommended sequence of steps:
  1. Step 1
    Before getting down to work, start the engine and let it warm up to operating temperature.
    Step 2
    Open the bonnet.
    Step 3
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 4
    Shut off the engine.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    How to change Lambda Sensor on Mercedes W414 2002 - free PDF and video manuals
    Undo the fasteners of the oil pan lower cover. Use a drive socket #8. Use a ratchet wrench.
  2. Step 7
    How to replace MERCEDES-BENZ VANEO (414) 1.7 CDI (414.700) 2003 Lambda Sensor - step-by-step manuals and video guides
    Remove the oil pan cover.
  3. Step 8
    Mercedes W414 1.9 (414.700) 2004 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 9
    Changing Lambda Sensor on MERCEDES-BENZ VANEO (414) 1.7 CDI (414.700) 2005 by yourself
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  5. Step 10
    How to remove MERCEDES-BENZ VANEO 1.9 (414.700) 2002 Lambda Sensor - online easy-to-follow instructions
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  6. Step 11
    How to replace Lambda Sensor on MERCEDES-BENZ VANEO (414) 2003: download PDF manuals and video instructions
    Remove the oxygen sensor.
  7. Step 12
    How hard is it to do yourself: Lambda Sensor replacement on Mercedes W414 1.7 CDI (414.700) 2004 - download illustrated guide
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  8. Step 13
    Need to know how to renew Lambda Sensor on MERCEDES-BENZ VANEO 2005? This free workshop manual will help you to do it yourself
    Treat the oxygen sensor. Use high-temperature ceramic grease.
  9. Step 14
    Changing of Lambda Sensor on Mercedes W414 2002 won't be an issue if you follow this illustrated step-by-step guide
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Vaneo (W414) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ VANEO (414) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ VANEO (414) Lambda Sensor replacement - online guide
Tips & tricks for your MERCEDES-BENZ VANEO (414)
View more
  • How to change Oxygen sensor on MERCEDES-BENZ VANEO (414) 1.6 (414.700) - replacement tricks
    How to start a car after a long idle period | AUTODOC tips
  • Changing O2 sensor Mercedes W414 1.7 CDI (414.700) - Replacement Tips
    How to replace a wheel stud | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ VANEO (414) 1.9 (414.700) NOx sensor replacement guide
    How to detect vacuum leaks using a smoke machine | AUTODOC
  • Replace Lambda sensors on Mercedes W414 - free video tips
    3 things to know before buying summer tyres | AUTODOC tips