How to carry out replacement: Lambda Sensor 313 CDI (903.663, 903.662, 903.661) Mercedes Sprinter W903 Van
Disclaimer
Change Mercedes Sprinter W903 Van 312 D 2.9 4x4 (903.461, 903.462) Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on MERCEDES-BENZ SPRINTER 3-t Box (903) – replacement guide

downloads: 3
Views: 48
Download your free tutorial and fix MERCEDES-BENZ SPRINTER 3-t Box (903) 313 CDI 4x4 (903.662, 903.663) problems yourself Download for free 1.04 MB Lambda Sensor for Mercedes Sprinter W903 Van Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your MERCEDES-BENZ SPRINTER
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ SPRINTER 3-t Box (903) 314 NGT (903.661, 903.061, 903.062, 903.063, 903.662), MERCEDES-BENZ SPRINTER 3-t Box (903) 314 4x4 (903.661, 903.662, 903.663) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for SPRINTER 3-t Box (903) and other MERCEDES-BENZ models
How to change Lambda sensor on Mercedes Sprinter W903 Van 313 CDI (903.663, 903.662, 903.661) – step-by-step instructions for straightforward car repair Lambda sensor
How to change Lambda sensor on Sprinter 3-T Van (W903) – tips for proper car maintenance
Lambda sensor for Sprinter 3-T Van (W903) Petrol/Natural Gas (CNG) (129 hp)
Simple DIY car repair steps – Replacing Lambda sensor on Sprinter 3-T Van (W903)
Lambda sensor for Sprinter 3-T Van (W903) Petrol (143 hp)
Tools
Replacement: lambda sensor – MERCEDES-BENZ SPRINTER 3-t Box (903). Tools you need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Drive socket # 8
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – MERCEDES-BENZ SPRINTER 3-t Box (903). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • All work should be done with the engine stopped.
Replacement: lambda sensor – MERCEDES-BENZ SPRINTER 3-t Box (903). Recommended sequence of steps:
  1. Step 1
    Before getting down to work, start the engine and let it warm up to operating temperature.
    Step 2
    Open the bonnet.
    Step 3
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 4
    Shut off the engine.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    How to change Lambda Sensor on Mercedes Sprinter W903 Van 1995 - free PDF and video manuals
    Undo the fasteners of the oil pan lower cover. Use a drive socket #8. Use a ratchet wrench.
  2. Step 7
    How to replace MERCEDES-BENZ SPRINTER 3-t Box (903) 313 CDI (903.663, 903.662, 903.661) 1996 Lambda Sensor - step-by-step manuals and video guides
    Remove the oil pan cover.
  3. Step 8
    Mercedes Sprinter W903 Van 312 D 2.9 (903.461, 903.462, 903.463) 1997 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 9
    Changing Lambda Sensor on MERCEDES-BENZ SPRINTER 3-t Box (903) 316 CDI (903.661, 903.662, 903.663) 1998 by yourself
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  5. Step 10
    How to remove MERCEDES-BENZ SPRINTER 308 CDI (903.661, 903.662, 903.663) 1999 Lambda Sensor - online easy-to-follow instructions
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  6. Step 11
    How to replace Lambda Sensor on MERCEDES-BENZ SPRINTER 3-t Box (903) 2000: download PDF manuals and video instructions
    Remove the oxygen sensor.
  7. Step 12
    How hard is it to do yourself: Lambda Sensor replacement on Mercedes Sprinter W903 Van 310 D 2.9 (903.461, 903.462, 903.463) 2001 - download illustrated guide
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  8. Step 13
    Need to know how to renew Lambda Sensor on MERCEDES-BENZ SPRINTER 2002? This free workshop manual will help you to do it yourself
    Treat the oxygen sensor. Use high-temperature ceramic grease.
  9. Step 14
    Changing of Lambda Sensor on Mercedes Sprinter W903 Van 2003 won't be an issue if you follow this illustrated step-by-step guide
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Sprinter 3-T Van (W903) model.

Mercedes Sprinter W903 Van tyre size

Popular maintenance tutorials for Mercedes Sprinter W903 Van

More manuals for Mercedes Sprinter W903 Van

Complete guides for changing the Oxygen sensor on different MERCEDES-BENZ SPRINTER models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ SPRINTER 3-t Box (903) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ SPRINTER 3-t Box (903) Lambda Sensor replacement - online guide
Tips & tricks for your MERCEDES-BENZ SPRINTER 3-t Box (903)
View more
  • How to change Oxygen sensor on MERCEDES-BENZ SPRINTER 3-t Box (903) 311 CDI (903.661, 903.662, 903.663) - replacement tricks
    DIY starter repair | AUTODOC tips
    41K views
    Published on: 31/08/2023
  • Changing O2 sensor Mercedes Sprinter W903 Van 313 CDI (903.663, 903.662, 903.661) - Replacement Tips
    Causes of a worn car boot damper | AUTODOC
    3K views
    Published on: 04/07/2021
  • Maintenance Hacks - MERCEDES-BENZ SPRINTER 3-t Box (903) 312 D 2.9 (903.461, 903.462, 903.463) NOx sensor replacement guide
    How to save when buying car parts
    2K views
    Published on: 03/02/2022
  • Replace Lambda sensors on Mercedes Sprinter W903 Van - free video tips
    How to prevent car windows from fogging up | AUTODOC tips
    12K views
    Published on: 04/02/2021

Most commonly replaced car parts on MERCEDES-BENZ SPRINTER

Professional manuals for the most common MERCEDES-BENZ models