When to replace the Lambda Sensor on your MERCEDES-BENZ SPRINTER
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ SPRINTER 2-t Box (901, 902) 214 NGT (901.661, 902.061, 902.062, 902.661, 902.662) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for SPRINTER 2-t Box (901, 902) and other MERCEDES-BENZ models
Alternative products
How to change Lambda sensor on Mercedes Sprinter 2t 208 CDI (901.661, 901.662, 902.661, 902.662) – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – MERCEDES-BENZ SPRINTER 2-t Box (901, 902). Tools you need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Drive socket # 8
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – MERCEDES-BENZ SPRINTER 2-t Box (901, 902). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • All work should be done with the engine stopped.
Replacement: lambda sensor – MERCEDES-BENZ SPRINTER 2-t Box (901, 902). Recommended sequence of steps:
  1. Step 1
    Before getting down to work, start the engine and let it warm up to operating temperature.
    Step 2
    Open the bonnet.
    Step 3
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 4
    Shut off the engine.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    How to change Lambda Sensor on Mercedes Sprinter 2t 1995 - free PDF and video manuals
    Undo the fasteners of the oil pan lower cover. Use a drive socket #8. Use a ratchet wrench.
  2. Step 7
    How to replace MERCEDES-BENZ SPRINTER 2-t Box (901, 902) 208 CDI (901.661, 901.662, 902.661, 902.662) 1996 Lambda Sensor - step-by-step manuals and video guides
    Remove the oil pan cover.
  3. Step 8
    Mercedes Sprinter 2t 211 CDI (901.661, 901.662, 902.661, 902.662) 1997 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 9
    Changing Lambda Sensor on MERCEDES-BENZ SPRINTER 2-t Box (901, 902) 213 CDI (901.661, 901.662, 902.661, 902.662) 1998 by yourself
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  5. Step 10
    How to remove MERCEDES-BENZ SPRINTER 212 D (901.461, 901.462, 902.461, 902.462) 1999 Lambda Sensor - online easy-to-follow instructions
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  6. Step 11
    How to replace Lambda Sensor on MERCEDES-BENZ SPRINTER 2-t Box (901, 902) 2000: download PDF manuals and video instructions
    Remove the oxygen sensor.
  7. Step 12
    How hard is it to do yourself: Lambda Sensor replacement on Mercedes Sprinter 2t 210 D (901.461, 901.462, 902.461, 902.462) 2001 - download illustrated guide
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  8. Step 13
    Need to know how to renew Lambda Sensor on MERCEDES-BENZ SPRINTER 2002? This free workshop manual will help you to do it yourself
    Treat the oxygen sensor. Use high-temperature ceramic grease.
  9. Step 14
    Changing of Lambda Sensor on Mercedes Sprinter 2t 2003 won't be an issue if you follow this illustrated step-by-step guide
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Sprinter 2-T Van (W901, W902) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY MERCEDES-BENZ SPRINTER 2-t Box (901, 902) Lambda Sensor replacement - online guide
Tips & tricks for your MERCEDES-BENZ SPRINTER 2-t Box (901, 902)
View more
  • How to change Oxygen sensor on MERCEDES-BENZ SPRINTER 2-t Box (901, 902) 208 D (901.361, 901.362, 902.361, 902.362) - replacement tricks
    How to remove rust | AUTODOC tips
  • Changing O2 sensor Mercedes Sprinter 2t 208 CDI (901.661, 901.662, 902.661, 902.662) - Replacement Tips
    Top 5 brake repair mistakes | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ SPRINTER 2-t Box (901, 902) 211 CDI (901.661, 901.662, 902.661, 902.662) NOx sensor replacement guide
    What to do if your check engine light is on | AUTODOC tips
  • Replace Lambda sensors on Mercedes Sprinter 2t - free video tips
    How to replace a timing chain yourself
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
MERCEDES-BENZ SPRINTER 2-t Box (901, 902) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME