When to replace the Ignition Leads on your VW SANTANA
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
VW SANTANA (32B) 1.6, VW SANTANA (32B) 1.8 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Leads for SANTANA (32B) and other VW models
How to change Ignition Cable Kit on VW Santana 32B 1.6 TD – step-by-step instructions for straightforward car repair Ignition Cable Kit
How to change Ignition lead on VW Santana 32B 1.6 TD – step-by-step instructions for straightforward car repair Ignition lead
Tools
Replacement: ignition leads – VW SANTANA (32B). Tools you might need:
Pincers
Fender cover
Replacement: ignition leads – VW SANTANA (32B). Professionals recommend:
  • All work should be done with the engine stopped.
Replacement: ignition leads – VW SANTANA (32B). Take the following steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Leads on VW Santana 32B 1981 - free PDF and video manuals
    Disconnect the high voltage wire.
    Replacement: ignition leads – VW SANTANA (32B). Tip:
    Wear dielectric gloves.
  2. Step 4
    How to replace VW SANTANA (32B) 1.6 TD 1982 Ignition Leads - step-by-step manuals and video guides
    Make marks on the distributor cap to indicate the installation order of the spark plug wires.
  3. Step 5
    VW Santana 32B 1.8 1983 Ignition Leads replacement: free workshop manuals
    Disconnect the spark plug wires from the spark plugs. Use pincers.
    Replacement: ignition leads – VW SANTANA (32B). AUTODOC recommends:
    Be careful to avoid damaging spark plug wires.
  4. Step 6
    Changing Ignition Leads on VW SANTANA (32B) 1.6 1984 by yourself
    Disconnect the spark plug wires from the distributor cap.
    Replacement: ignition leads – VW SANTANA (32B). AUTODOC experts recommend:
    Be careful to avoid damaging spark plug wires.
  5. Step 7
    How to remove VW SANTANA 2.1 1985 Ignition Leads - online easy-to-follow instructions
    Connect new spark plug wires to the distributor cap.
    Replacement: ignition leads – VW SANTANA (32B). AUTODOC recommends:
    Follow the installation sequence.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW SANTANA (32B) Ignition Leads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW SANTANA (32B) Ignition Leads replacement - online guide
Tips & tricks for your VW SANTANA (32B)
View more
  • How to change Plug leads on VW SANTANA (32B) 1.6 D - replacement tricks
    How to restore wheel rims | AUTODOC tips
  • Changing Spark plug leads VW Santana 32B 1.6 TD - Replacement Tips
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Maintenance Hacks - VW SANTANA (32B) 1.8 Spark plug wire replacement guide
    Things you should never do with an automatic transmission | AUTODOC tips
  • Replace Ignition cable set on VW Santana 32B - free video tips
    What to do if the airbag light is on | AUTODOC tips