Disclaimer
How to change ignition coil on VW Polo IV Saloon (9A4, 9A2, 9N2, 9A6) – replacement guide
downloads:
0
Views:
1
Important!
This replacement procedure can be used for:
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 … View more
The steps may slightly vary depending on the car design.
VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4, VW Polo Saloon (9A4, 9A2, 9N2, 9A6) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for Polo Saloon (9A4, 9A2, 9N2, 9A6) and other VW models
Electronic spray
High-temperature anti-seize lubricant
Crow bar
Flat screwdriver
Microfibre towel
Fender cover
Replacement: ignition coil – VW POLO Saloon (9A4). Tip from AUTODOC experts:
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- Warning! Shut down the engine before starting any work – VW POLO Saloon (9A4).
Carry out replacement in the following order:
- Step 1
Open the hood. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Detach the crankcase ventilation hose from the engine cover at the left. - Step 4
Remove the engine cover. - Step 5
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 6
Detach the crankcase ventilation hose from the oil filler neck. - Step 7
Unscrew the oil filler neck. Remove the oil filler neck. - Step 8
Cover the oil filler opening with a microfibre towel to prevent dirt and foreign objects from getting into the system. - Step 9
Undo the plastic locking tabs of the ignition coil connector. Use a flat screwdriver. - Step 10
Pry up the ignition coil. Use a crowbar. Use a flat screwdriver. - Step 11
Take out the ignition coil from the spark plug well.Replacement: ignition coil – VW POLO Saloon (9A4). AUTODOC recommends:Remember the sequence of steps for ignition coil demounting. - Step 12
Detach the connector from the ignition coil. - Step 13
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance. - Step 14
Treat the ignition coil tip. Use high-temperature grease. Use a flat screwdriver. - Step 15
Plug in the ignition coil connector. - Step 16
Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo IV Saloon (9A4, 9A2, 9N2, 9A6) model.
Popular maintenance tutorials for VW Polo 9A4
Free download PDF
6.26 MB
Free download PDF1.24 MB
Free download PDF890.88 KB
Free download PDF1.36 MB
Free download PDF1003.52 KB
Free download PDF2.19 MB
Complete guides for changing the Coil pack on different VW POLO models
Free download PDF1.82 MB
Free download PDF2.17 MB
Free download PDF1.63 MB
Free download PDF1.49 MB
Free download PDF1.02 MB
Free download PDF1.02 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your VW Polo Saloon (9A4, 9A2, 9N2, 9A6)
View more
How to paint a car with a spray can | AUTODOC tips
Things you should never do with your manual transmission | AUTODOC tips
How to shine your tyres | AUTODOC tips
How to restore a steering wheel | AUTODOC tips
