Disclaimer
How to change ignition coil on VW Passat B7 Variant (365) – replacement guide
downloads:
7
Views:
188
Important!
This replacement procedure can be used for:
VW Passat Variant (365) 1.4 TSI, VW Passat Variant (365) 1.4 TSI MultiFuel, VW Passat Variant (365) 1.4 TSI EcoFuel, VW Passat Variant (365) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
VW Passat Variant (365) 1.4 TSI, VW Passat Variant (365) 1.4 TSI MultiFuel, VW Passat Variant (365) 1.4 TSI EcoFuel, VW Passat Variant (365) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for Passat Variant (365) and other VW models
Ignition coil
Alternative products
Ignition coil
Electronic spray
High-temperature anti-seize lubricant
Crow bar
Flat screwdriver
Microfibre towel
Fender cover
Replacement: ignition coil – VW PASSAT Variant (365). Tip from AUTODOC experts:
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- Warning! Shut down the engine before starting any work – VW PASSAT Variant (365).
Carry out replacement in the following order:
- Step 1
Open the hood. - Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 3
Detach the crankcase ventilation hose from the engine cover at the left. - Step 4
Remove the engine cover. - Step 5
Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system. - Step 6
Detach the crankcase ventilation hose from the oil filler neck. - Step 7
Unscrew the oil filler neck. Remove the oil filler neck. - Step 8
Cover the oil filler opening with a microfibre towel to prevent dirt and foreign objects from getting into the system. - Step 9
Undo the plastic locking tabs of the ignition coil connector. Use a flat screwdriver. - Step 10
Pry up the ignition coil. Use a crowbar. Use a flat screwdriver. - Step 11
Take out the ignition coil from the spark plug well.Replacement: ignition coil – VW PASSAT Variant (365). AUTODOC recommends:Remember the sequence of steps for ignition coil demounting. - Step 12
Detach the connector from the ignition coil. - Step 13
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance. - Step 14
Treat the ignition coil tip. Use high-temperature grease. Use a flat screwdriver. - Step 15
Plug in the ignition coil connector. - Step 16
Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Passat B7 Variant (365) model
Popular maintenance tutorials for Passat 365
Free download PDF
890.88 KB
Free download PDF1.23 MB
Free download PDF4.12 MB
Free download PDF1.2 MB
Free download PDF1.36 MB
Free download PDF1.72 MB
Complete guides for changing the Coil pack on different VW PASSAT models
Free download PDF1.8 MB
Free download PDF1.8 MB
Free download PDF1.8 MB
Free download PDF1.8 MB
Free download PDF1.63 MB
Free download PDF1.63 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Passat Variant (365)
View more
DIY jack restoration | AUTODOC tips
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
Most commonly replaced car parts on VW PASSAT
Time to replace parts? Get even better deals in our Shop app.
SCAN ME