Important!
This replacement procedure can be used for:
VAUXHALL ZAFIRA Mk III (P12) 1.6 CNG (75) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for ZAFIRA Mk III (P12) and other VAUXHALL models
Tools
Replacement: ignition coil – VAUXHALL ZAFIRA Mk III (P12). Tools you need:
Electronic spray
Torque wrench
Torx bit T40
Ratchet wrench
Crow bar
Fender cover
Replacement: ignition coil – VAUXHALL ZAFIRA Mk III (P12). AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • Please note: all work on the car – VAUXHALL ZAFIRA Mk III (P12) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Zafira C P12 2011 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – VAUXHALL ZAFIRA Mk III (P12). Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace VAUXHALL ZAFIRA Mk III (P12) 1.4 (75) 2012 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    Zafira C P12 2.0 CDTi (75) 2013 Ignition Coil replacement: free workshop manuals
    Unscrew the ignition coil bolts. Use Torx T40. Use a ratchet wrench.
  4. Step 6
    Pry up the ignition coil. Use a crowbar.
    Step 7
    Changing Ignition Coil on VAUXHALL ZAFIRA Mk III (P12) 1.8 (75) 2014 by yourself
    Take out the ignition coil from the spark plug well.
  5. Step 8
    How to remove VAUXHALL ZAFIRA 1.6 CNG (75) 2015 Ignition Coil - online easy-to-follow instructions
    Clean dirt, dust and debris from inside the spark plug wells.
  6. Step 9
    How to replace Ignition Coil on VAUXHALL ZAFIRA Mk III (P12) 2016: download PDF manuals and video instructions
    Install the new ignition coil to the spark plug well.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on Zafira C P12 2.0 CDTi (75) 2017 - download illustrated guide
    Tighten the ignition coil bolts. Use Torx T40. Use a torque wrench. Tighten it to 7 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Zafira Tourer Mk3 (C) (P12) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VAUXHALL ZAFIRA Mk III (P12) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VAUXHALL ZAFIRA Mk III (P12) Ignition Coil replacement - online guide
Tips & tricks for your VAUXHALL ZAFIRA Mk III (P12)
View more
  • How to change Coil pack on VAUXHALL ZAFIRA Mk III (P12) 1.6 CDTi (75) - replacement tricks
    Important differences between car tools | AUTODOC tips
  • Changing Ignition coil pack Zafira C P12 1.4 (75) - Replacement Tips
    DIY alternator repair | AUTODOC tips
  • Maintenance Hacks - VAUXHALL ZAFIRA Mk III (P12) 2.0 CDTi (75) Ignition coils replacement guide
    How to swap the engine on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Replace Coil packs on Zafira C P12 - free video tips
    Top 5 reasons why the suspension knocks | AUTODOC tips