Important!
This replacement procedure can be used for:
VAUXHALL ZAFIRA Mk III (P12) 1.8 (75) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for ZAFIRA Mk III (P12) and other VAUXHALL models
Tools
Replacement: shock absorbers – VAUXHALL ZAFIRA Mk III (P12). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 18
Drive socket # E20
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – VAUXHALL ZAFIRA Mk III (P12). AUTODOC experts recommend:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • Please note: all work on the car – VAUXHALL ZAFIRA Mk III (P12) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Shock Absorber on Zafira C P12 2011 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VAUXHALL ZAFIRA Mk III (P12) 1.4 (75) 2012 Shock Absorber - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Zafira C P12 2.0 CDTi (75) 2013 Shock Absorber replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: shock absorbers – VAUXHALL ZAFIRA Mk III (P12). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Shock Absorber on VAUXHALL ZAFIRA Mk III (P12) 1.8 (75) 2014 by yourself
    Remove the wheel.
  5. Step 6
    How to remove VAUXHALL ZAFIRA 1.6 CNG (75) 2015 Shock Absorber - online easy-to-follow instructions
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Shock Absorber on VAUXHALL ZAFIRA Mk III (P12) 2016: download PDF manuals and video instructions
    Loosen the lower fastener of the shock absorber. Use a drive socket #E20. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Shock Absorber replacement on Zafira C P12 2.0 CDTi (75) 2017 - download illustrated guide
    Support the rear suspension beam. Use a hydraulic transmission jack.
  8. Step 9
    Need to know how to renew Shock Absorber on VAUXHALL ZAFIRA 2018? This free workshop manual will help you to do it yourself
    Unscrew the lower fastener of the shock absorber. Use a drive socket #E20. Use a ratchet wrench.
  9. Step 10
    Changing of Shock Absorber on Zafira C P12 2011 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolt.
  10. Step 11
    VAUXHALL ZAFIRA 1.8 (75) Shock Absorber replacement: online guides and video tutorials
    Unscrew the upper fastener of the shock absorber. Use a drive socket #18. Use a ratchet wrench.
    AUTODOC recommends:
    Important! Hold the shock absorber while unscrewing the fastening bolts. VAUXHALL ZAFIRA Mk III (P12)
  11. Step 12
    Replacing Shock Absorber on Zafira C P12 2013 1.4 (75) by yourself
    Remove the fastening bolt.
  12. Step 13
    ZAFIRA Mk III (P12) 1.6 CNG (75) 2014 Shock Absorber DIY replacement workshop manual
    Remove the shock absorber.
  13. Step 14
    How to change Shock Absorber on VAUXHALL ZAFIRA Mk III (P12) 2015 - tips and tricks
    Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
    Replacement: shock absorbers – VAUXHALL ZAFIRA Mk III (P12). Tip:
    Before installing a new shock absorber you should pump it manually 3-5 times.
  14. Step 15
    Step-by-step recommendations for DIY replacement Zafira C P12 2016 1.6 CNG (75) Shock Absorber
    Place the shock absorber in the wheel arch and secure it.
    AUTODOC recommends:
    VAUXHALL ZAFIRA Mk III (P12) – To avoid injury, hold the shock absorber while screwing in the fastening bolts.
  15. Step 16
    DIY replacement of Shock Absorber on VAUXHALL ZAFIRA Mk III (P12) 1.6 CDTi (75) 2017 is not an issue anymore with our step-by-step tutorial
    Install the fastening bolts (2 pieces).
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Zafira Tourer Mk3 (C) (P12) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VAUXHALL ZAFIRA Mk III (P12) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VAUXHALL ZAFIRA Mk III (P12) Shock Absorber replacement - online guide
Tips & tricks for your VAUXHALL ZAFIRA Mk III (P12)
View more
  • How to change Shocks on VAUXHALL ZAFIRA Mk III (P12) 1.6 CDTi (75) - replacement tricks
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
  • Changing Shock absorbers Zafira C P12 1.4 (75) - Replacement Tips
    TOP 4 car cleaning products | AUTODOC tips
  • Maintenance Hacks - VAUXHALL ZAFIRA Mk III (P12) 2.0 CDTi (75) Struts replacement guide
    Coolant comparison test | AUTODOC
  • Replace Struts and shocks on Zafira C P12 - free video tips
    How to easily repair a punctured tyre | AUTODOC tips