Important!
This replacement procedure can be used for:
SEAT Cordoba Saloon (6K2) 1.4 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for Cordoba Saloon (6K2) and other SEAT models
Alternative products
How to change Ignition coil on Seat Cordoba 6K2 1.9 TDI – step-by-step instructions for straightforward car repair Ignition coil
Tools
Replacement: ignition coil – SEAT CORDOBA (6K2). List of the tools you'll need:
Electronic spray
All-purpose cleaning spray
Torque wrench
HEX bit No.H5
Ratchet wrench
Fender cover
Replacement: ignition coil – SEAT CORDOBA (6K2). AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • Please note: all work on the car – SEAT CORDOBA (6K2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Seat Cordoba 6K2 1999 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – SEAT CORDOBA (6K2). Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace SEAT Cordoba Saloon (6K2) 1.9 TDI 2000 Ignition Coil - step-by-step manuals and video guides
    Clean the ignition coil bolts. Use all-purpose cleaning spray.
  3. Step 5
    Seat Cordoba 6K2 1.4 2001 Ignition Coil replacement: free workshop manuals
    Disconnect the spark plug wires from the ignition coil.
    Replacement: ignition coil – SEAT CORDOBA (6K2). AUTODOC recommends:
    Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires.
  4. Step 6
    Changing Ignition Coil on SEAT Cordoba Saloon (6K2) 1.4 16V 2002 by yourself
    Detach the connector from the ignition coil.
  5. Step 7
    How to remove SEAT CORDOBA 1.0 1999 Ignition Coil - online easy-to-follow instructions
    Unscrew the ignition coil bolts. Use HEX No.H5. Use a ratchet wrench.
  6. Step 8
    How to replace Ignition Coil on SEAT Cordoba Saloon (6K2) 2000: download PDF manuals and video instructions
    Take out the ignition coil from the spark plug well.
  7. Step 9
    How hard is it to do yourself: Ignition Coil replacement on Seat Cordoba 6K2 1.4 2001 - download illustrated guide
    Install the new ignition coil to the spark plug well.
  8. Step 10
    Need to know how to renew Ignition Coil on SEAT CORDOBA 2002? This free workshop manual will help you to do it yourself
    Tighten the ignition coil bolts. Use HEX No.H5. Use a torque wrench. Tighten it to 7 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Córdoba I Saloon (6K2) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Cordoba Saloon (6K2) Ignition Coil replacement - online guide
Tips & tricks for your SEAT Cordoba Saloon (6K2)
View more
  • How to change Coil pack on SEAT Cordoba Saloon (6K2) 1.6 - replacement tricks
    5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
  • Changing Ignition coil pack Seat Cordoba 6K2 1.9 TDI - Replacement Tips
    How to unlock your car without a key | AUTODOC tips
  • Maintenance Hacks - SEAT Cordoba Saloon (6K2) 1.4 Ignition coils replacement guide
    Don’t Replace, Restore: Fixing Damaged Threads at Home
  • Replace Coil packs on Seat Cordoba 6K2 - free video tips
    Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Cordoba Saloon (6K2) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME