Important!
This replacement procedure can be used for:
PEUGEOT 308 II 1.6 GTi PureTech 263 (L3EGXP), PEUGEOT 308 II 1.6 PureTech 225, PEUGEOT 308 II 1.6 GTi, PEUGEOT 308 II 1.6 GTi (L35GNH), PEUGEOT 308 II 1.6 THP 163, PEUGEOT 308 II 1.6 THP 150, PEUGEOT 308 II 1.6 GT 205, PEUGEOT 308 II 1.6 THP 125, PEUGEOT 308 II 1.6 THP View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for 308 II and other PEUGEOT models
How to change Ignition coil on Peugeot 308 Mk2 1.6 BlueHDi 120 – step-by-step instructions for straightforward car repair Ignition coil
How to change Puller, ignition coil unit on Peugeot 308 Mk2 1.6 BlueHDi 120 – step-by-step instructions for straightforward car repair Puller, ignition coil unit
Tools
Replacement: ignition coil – PEUGEOT 308 II. List of the tools you'll need:
Electronic spray
Flat screwdriver
Fender cover
Ignition coil removal tool
Replacement: ignition coil – PEUGEOT 308 II. AUTODOC recommends:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – PEUGEOT 308 II. Recommended sequence of steps:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Peugeot 308 Mk2 2013 - free PDF and video manuals
    Unplug the connectors from the ignition coils.
  2. Step 4
    How to replace PEUGEOT 308 II 1.6 BlueHDi 120 2014 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    Peugeot 308 Mk2 1.6 HDi / BlueHDi 115 2015 Ignition Coil replacement: free workshop manuals
    Pry up the ignition coil. Use an ignition coil remover. Take out the ignition coil from the spark plug well.
  4. Step 6
    Changing Ignition Coil on PEUGEOT 308 II 1.2 THP 130 2016 by yourself
    Clean dirt, dust and debris from inside the spark plug well.
  5. Step 7
    How to remove PEUGEOT 308 2.0 BlueHDi 150 2017 Ignition Coil - online easy-to-follow instructions
    Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 308 II Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 308 II Ignition Coil replacement - online guide
Tips & tricks for your PEUGEOT 308 II
View more
  • How to change Coil pack on PEUGEOT 308 II 1.6 HDi - replacement tricks
    Causes of a worn car boot damper | AUTODOC
  • Changing Ignition coil pack Peugeot 308 Mk2 1.6 BlueHDi 120 - Replacement Tips
    How to replace a wheel stud | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 308 II 1.6 HDi / BlueHDi 115 Ignition coils replacement guide
    DIY valve cover restoration | AUTODOC tips
  • Replace Coil packs on Peugeot 308 Mk2 - free video tips
    What to do if the TPMS light is on | AUTODOC tips