How to carry out replacement: Ignition Coil 1.6 CVTC NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E)
Disclaimer
Change NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 Ignition Coil yourself – manuals and video tutorials

How to change ignition coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) – replacement guide

downloads: 4
Views: 80
Download your free tutorial and fix NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC problems yourself Download for free 1.92 MB Ignition Coil for NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for Qashqai / Qashqai+2 I Van (J10, JJ10E) and other NISSAN models
Alternative products
How to change Ignition coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC – step-by-step instructions for straightforward car repair Ignition coil
Tools
Replacement: ignition coil – NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E). List of the tools you'll need:
Electronic spray
Torque wrench
Drive socket # 8
Drive socket # 10
Ratchet wrench
Round-nose pliers
Flat screwdriver
Microfibre towel
Fender cover
Buy tools
Replacement: ignition coil – NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E). AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • All work should be done with the engine stopped.
Replacement: ignition coil – NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2006 - free PDF and video manuals
    Disconnect the crankcase ventilation hose from the air duct. Use round-nose pliers.
  2. Step 4
    How to replace NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC 2007 Ignition Coil - step-by-step manuals and video guides
    Unscrew the clamps and fasteners on the air filter intake pipe. Use a drive socket #10. Use a ratchet wrench.
  3. Step 5
    Disconnect the air intake pipe from the air filter housing.
    Step 6
    NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 2008 Ignition Coil replacement: free workshop manuals
    Unscrew the fasteners connecting the throttle valve to the intake manifold. Use a drive socket #8. Use a ratchet wrench.
  4. Step 7
    Changing Ignition Coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.5 dCi 2009 by yourself
    Release the clamp and detach the connector and the vacuum hose from the intake manifold near the throttle valve. Use round-nose pliers.
  5. Step 8
    How to remove NISSAN QASHQAI 1.6 dCi 2010 Ignition Coil - online easy-to-follow instructions
    Unscrew the fasteners of the intake manifold bracket. Use a drive socket #10.
  6. Step 9
    How to replace Ignition Coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2011: download PDF manuals and video instructions
    Detach the vacuum booster hose from the intake manifold.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 dCi Allrad 2012 - download illustrated guide
    Unscrew the intake manifold fasteners. Use a drive socket #10. Use a ratchet wrench.
  8. Step 11
    Need to know how to renew Ignition Coil on NISSAN QASHQAI 2013? This free workshop manual will help you to do it yourself
    Remove the intake manifold.
  9. Step 12
    Changing of Ignition Coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2014 won't be an issue if you follow this illustrated step-by-step guide
    Cover the intake manifold passages with a microfibre towel to prevent dust and dirt from getting inside.
  10. Step 13
    NISSAN QASHQAI 2.0 Ignition Coil replacement: online guides and video tutorials
    Detach the connector from the ignition coil.
  11. Step 14
    Replacing Ignition Coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2007 1.6 CVTC by yourself
    Unscrew the ignition coil bracket. Use a drive socket #10.
  12. Step 15
    Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 dCi 2008 Ignition Coil DIY replacement workshop manual
    Take out the ignition coil from the spark plug well.
  13. Step 16
    Clean dirt, dust and debris from inside the spark plug well.
    Step 17
    How to change Ignition Coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2009 - tips and tricks
    Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place.
  14. Step 18
    Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
    Step 19
    Step-by-step recommendations for DIY replacement NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2010 1.6 dCi Ignition Coil
    Tighten the ignition coil fastening. Use a drive socket #10. Use a torque wrench. Tighten it to 7 nm torque.
  15. Step 20
    DIY replacement of Ignition Coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 Allrad 2011 is not an issue anymore with our step-by-step tutorial
    Plug in the ignition coil connector.
  16. Step 21
    How to change Ignition Coil on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2006 - free PDF and video manuals
    Remove the microfibre towel from the intake manifold.
  17. Step 22
    How to replace NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC 2007 Ignition Coil - step-by-step manuals and video guides
    Remove the intake manifold gasket. Use a flat screwdriver.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) model

NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) tyre size

Popular maintenance tutorials for NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E)

More manuals for NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E)

Complete guides for changing the Coil pack on different NISSAN QASHQAI models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) Ignition Coil replacement - online guide
Tips & tricks for your NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E)
View more
  • How to change Coil pack on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 Allrad - replacement tricks
    5 mistakes when replacing consumables
    5K views
    Published on: 06/02/2025
  • Changing Ignition coil pack NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 1.6 CVTC - Replacement Tips
    Top 5 reasons why your car squeals | AUTODOC Tips
    9K views
    Published on: 26/10/2023
  • Maintenance Hacks - NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) 2.0 Ignition coils replacement guide
    How to remove scratches from car plastic | AUTODOC tips
    175K views
    Published on: 15/12/2022
  • Replace Coil packs on NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) - free video tips
    Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
    2K views
    Published on: 26/08/2021

Most commonly replaced car parts on NISSAN QASHQAI

Professional manuals for the most common NISSAN models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN Qashqai / Qashqai+2 I Van (J10, JJ10E) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME