How to change glow plugs on RENAULT Espace III (JE) – replacement guide
RENAULT ESPACE III (JE0_) 2.2 dCi (JE0S), RENAULT ESPACE III (JE0_) 2.2 dCi (JE0K) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
Glow plug
- The replacement procedure is identical for all glow plugs.
- All the work should be carried out with the ignition switched off.
- Step 1
Open the bonnet.
Step 2Use a fender protection cover to avoid damaging the paintwork and plastic parts of the car.
Step 3
Loosen the clamp that connects the air intake hose to the mass air flow sensor. Use a 7 mm socket. Use a ratchet wrench.
- Step 4
Detach the air intake hose from the MAF sensor.
Replacement: glow plugs – RENAULT ESPACE III (JE0_). Professionals recommend:Protect the MAF sensor and other air intake system components from contaminants getting in.
- Step 5
Remove the air filter housing together with the air intake hose.
- Step 6
Unscrew the coolant expansion tank fastener. Use a 10 mm socket. Use a ratchet wrench.
- Step 7
Remove the fastening bolt.
- Step 8
Remove the coolant expansion tank.
- Step 9
Detach the glow plug connectors.
- Step 10
Clean the glow plug wells. Use WD-40 spray.
- Step 11
Unscrew the glow plugs. Use a 10 mm glow plug socket. Use a torque wrench. Use a ratchet wrench.
Replacement: glow plugs – RENAULT ESPACE III (JE0_). Tip from AUTODOC:Glow plugs can get stuck over time and break apart when removed.Before unscrewing the parts, use a torque wrench to loosen them to avoid exceeding the breakaway torque specified by the car manufacturer.If you have reached the breakaway torque but the glow plugs still will not loosen up, you need to seek professional help: a glow plug fragment left inside the well or damage to the thread of the mounting seat can result in costly engine repairs.
- Step 12
Remove the glow plugs. Use glow plug pliers.
- Step 13
Treat the new glow plugs. Use ceramic grease.
- Step 14
Install the new glow plugs into their mounting seats. Use glow plug pliers. Use a ratchet wrench.
- Step 15
Tighten the glow plugs. Use a 10 mm glow plug socket. Use a torque wrench. Tightening torque: 15 N·m.
Replacement: glow plugs – RENAULT ESPACE III (JE0_). AUTODOC recommends:Don't use excessive force when tightening the glow plugs. Overtightening can damage the threaded connection.
- Step 16
Treat the glow plug connectors. Use an electronic spray.
Find out which tyre and wheel sizes are compatible with the RENAULT Espace III (JE) model
Popular maintenance tutorials for Renault Espace 3
Free download PDF 1.1 MB
Free download PDF 1.95 MB
Free download PDF 983.04 KB
Free download PDF 1.08 MB
Free download PDF 1.38 MB
Free download PDF 1.99 MB
Complete guides for changing the Glow plug on different RENAULT ESPACE models
Free download PDF 1.67 MB
Free download PDF 1.62 MB
Free download PDF 1.77 MB
Free download PDF 2.11 MB
Free download PDF 1.55 MB
Free download PDF 1.56 MB
Track expenses, manage logs, schedule replacements, and more.
When, why, and how to change engine oil | AUTODOC tips
DIY rear axle restoration | Drivetrain restoration – Part 2
#DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
Most commonly replaced car parts on RENAULT ESPACE
