Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.Attention! Use quality filters – VW Passat B7 saloon.
Step 11
Install and tighten the cap of the fuel filter housing. Use Torx T15. Use a ratchet wrench.
Step 12
Tighten the fasteners of the fuel filter housing cover. Use Torx T15. Use a torque wrench. Tighten it to 6 Nm torque.
Step 13
Connect the scan and service tool and set the fuel system to operating mode. This is necessary so that the fuel system fills completely with fuel.
Step 14
Switch on the ignition.
Step 15
Disconnect the scan and service tool.
Step 16
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VW Passat Saloon (362)
View more
Causes of a worn car boot damper | AUTODOC
What to do if your check engine light is on | AUTODOC tips
How to Make a DIY Foam Sprayer | AUTODOC tips
How to unlock your car without a key | AUTODOC tips