Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
All work should be done with the engine stopped.
Carry out replacement in the following order:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Press the clip.
Step 4
Remove the blade from the wiper arm.
AUTODOC recommends:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 5
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – VW Golf 3. Tip:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 6
Switch on the ignition.
Step 7
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the VW Golf III Hatchback (1H1) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your VW GOLF III (1H1)
View more
Car checks you need to carry out on your car after the winter | AUTODOC tips
5 mistakes made when washing the engine | AUTODOC tips
Top 6 products for enhancing your car | AUTODOC tips