How to change front windshield wipers on Opel Meriva X03 – replacement guide
downloads:
18
Views:
229
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
OPEL Meriva A (X03) 1.4 16V Twinport LPG (E75),
OPEL Meriva A (X03) 1.8 (E75),
OPEL Meriva A (X03) 1.7 DTI (E75),
OPEL Meriva A (X03) 1.6 (E75),
OPEL Meriva A (X03) 1.7 CDTI (E75),
OPEL Meriva A (X03) 1.4 16V Twinport (E75),
OPEL Meriva A (X03) 1.6 (E75),
OPEL Meriva A (X03) 1.3 CDTI (E75),
OPEL Meriva A (X03) 1.6 Turbo (E75),
OPEL Meriva A (X03) 1.7 CDTI (E75),
OPEL Meriva A (X03) 1.3 CDTI (E75)
…
View more
The steps may slightly vary depending on the car design.
How to change wipers blades OPEL MERIVA A [TUTORIAL AUTODOC]
All the parts you need to replace – Wiper Blades for Meriva A (X03) and other OPEL models
Wiper blade OPEL Meriva A (X03) 1.6 (E75) 105 hp Petrol
Wiper blade OPEL Meriva A (X03) 1.3 CDTI (E75) 75 hp Diesel
Wiper blade OPEL Meriva A (X03) 1.6 Turbo (E75) 180 hp Petrol
Replacement: windshield wipers – Opel Meriva X03. Tools you'll need:
Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
All work should be done with the engine stopped.
Replacement: windshield wipers – Opel Meriva X03. Recommended sequence of steps:
Step 1
Prepare the new windscreen wipers.
Step 2
Pull the wiper arm away from the glass surface until it stops.
Step 3
Press the clip.
Step 4
Remove the blade from the wiper arm.
Replacement: windshield wipers – Opel Meriva X03. Tip:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 5
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – Opel Meriva X03. Professionals recommend:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 6
Switch on the ignition.
Step 7
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Meriva A (X03) model