How to change front windshield wipers on AUDI TT Coupe (8J3) – replacement guide
downloads:
5
Views:
77
0
Users voted – 0
Recommended replacement interval for the part category Wiper blade : 12month
Important!
This replacement procedure can be used for:
AUDI TT Coupe (8J3) 2.0 TFSI,
AUDI TT Coupe (8J3) 2.0 TFSI quattro,
AUDI TT Coupe (8J3) 2.5 RS quattro,
AUDI TT Coupe (8J3) 2.0 TFSI,
AUDI TT Coupe (8J3) 3.2 V6 quattro,
AUDI TT Coupe (8J3) 2.0 TTS quattro,
AUDI TT Coupe (8J3) 1.8 TFSI,
AUDI TT Coupe (8J3) 2.0 TDI quattro,
AUDI TT Coupe (8J3) 2.0 TTS quattro,
AUDI TT Coupe (8J3) 2.0 TFSI quattro,
AUDI TT Coupe (8J3) 2.5 RS quattro
…
View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wiper Blades for TT Coupe (8J3) and other AUDI models
Wiper blade for AUDI TT Coupe (8J3) 1.8 TFSI Petrol (160 hp)
Wiper blade for AUDI TT Coupe (8J3) 2.0 TDI quattro Diesel (170 hp)
Wiper blade for AUDI TT Coupe (8J3) 2.0 TTS quattro Petrol (265 hp)
Replacement: windshield wipers – AUDI TT (8J3). AUTODOC recommends:
Always replace front wiper blades together. It will ensure efficient and uniform cleaning of the windshield.
Don't confuse the wiper blades of the driver and passenger side.
The replacement procedure for both wiper blades is identical.
All work should be done with the engine stopped.
Replacement: windshield wipers – AUDI TT (8J3). Take the following steps:
Step 1
Switch on the ignition. Set the windscreen wipers to the service position.
Step 2
Switch off the ignition. In the service mode, the wipers will be in the upper position.
Step 3
Prepare the new windscreen wipers.
Step 4
Pull the wiper arm away from the glass surface until it stops.
Step 5
Press the clip. Remove the blade from the wiper arm.
Replacement: windshield wipers – AUDI TT (8J3). AUTODOC experts recommend:
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 6
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – AUDI TT (8J3). Tip:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 7
Switch on the ignition. Return the windscreen wipers from the service position.
Step 8
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Step 9
Switch off the ignition.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your AUDI TT Coupe (8J3)
View more
How to restore a damaged thread | AUTODOC tips
How to detect vacuum leaks using a smoke machine | AUTODOC
How to start a car after a long idle period | AUTODOC tips
How to remove scratches from car plastic | AUTODOC tips