Disclaimer
How to change front window regulator on PEUGEOT PARTNER Platform/Chassis – replacement guide
downloads:
2
Views:
141
Important!
This replacement procedure can be used for:
PEUGEOT PARTNER Platform/Chassis 2.0 HDi, PEUGEOT PARTNER Platform/Chassis 1.9 D … View more
The steps may slightly vary depending on the car design.
PEUGEOT PARTNER Platform/Chassis 2.0 HDi, PEUGEOT PARTNER Platform/Chassis 1.9 D … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Window Regulator for PARTNER Platform/Chassis and other PEUGEOT models
Alternative products

Threadlocker
Torque wrench
Drive socket # 10
Torx bit T20
Torx bit T30
Ratchet wrench
Plastic trim tool
Replacement: window regulator – PEUGEOT PARTNER Platform/Chassis. Tip from AUTODOC:
- All work should be done with the engine stopped.
Replacement: window regulator – PEUGEOT PARTNER Platform/Chassis. Use the following procedure:
- Step 1Open the car door.Step 2
Detach the window regulator handle. Use a plastic trim tool.AUTODOC recommends:Replacement: window regulator – PEUGEOT PARTNER Platform/Chassis. Do not use excessive force when removing the part as this may damage it. - Step 3
Detach the door handle trim panel. Use a plastic trim tool.AUTODOC recommends:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 4
Remove the door handle frame. Use a plastic trim tool.AUTODOC recommends:Replacement: window regulator – PEUGEOT PARTNER Platform/Chassis. To avoid damaging the part when removing it, do not use excessive force. - Step 5
Unscrew the lower fasteners of the door card. Use Torx T20. - Step 6
Unscrew the door handle fastener. Use Torx T30. - Step 7
Detach the door card.AUTODOC recommends:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 8
Remove the upper rubber seal. - Step 9
Remove the door card. - Step 10
Detach the door panel sound insulation. - Step 11
Remove the door handle. - Step 12
Attach the window regulator handle. - Step 13
Lower the glass so that you can see the fasteners that connect it to the window regulator mechanism. - Step 14
Detach the window regulator handle. - Step 15
Detach the glass fasteners. Use a plastic trim tool. - Step 16
Raise the glass a little and remove it.AUTODOC recommends:To avoid injury, hold the glass when raising it.Replacement: window regulator – PEUGEOT PARTNER Platform/Chassis. Do not use excessive force during installation. This may damage the part. - Step 17
Unscrew the fasteners of the window regulator assembly. Use a drive socket #10. Use a ratchet wrench. - Step 18
Remove the window regulator mechanism. - Step 19
Install the new window regulator mechanism. - Step 20
Treat the thread of the window regulator fasteners. Use threadlocker. - Step 21
Tighten the fasteners of the window regulator assembly. Use a drive socket #10. Use a torque wrench. Tighten it to 12 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT Partner I Platform / Chassis model
Popular maintenance tutorials for PEUGEOT PARTNER Platform/Chassis
Complete guides for changing the Window mechanism on different PEUGEOT PARTNER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT PARTNER Platform/Chassis
View more
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
How to Fix P0401 ✅ error code Insufficient EGR flow
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
Most commonly replaced car parts on PEUGEOT PARTNER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























