Disclaimer
How to change front strut mount on Opel Corsa S93 – replacement guide
downloads:
7
Views:
74
Important!
This replacement procedure can be used for:
OPEL Corsa B Hatchback (S93) 1.4 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.5 D (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.5 TD (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 Si (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 GSI 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.7 D (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.0 i 12V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 (F08, F68, M68) … View more
The steps may slightly vary depending on the car design.
OPEL Corsa B Hatchback (S93) 1.4 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.5 D (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.5 TD (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 Si (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 GSI 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.7 D (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.0 i 12V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.2 i (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.6 i 16V (F08, F68, M68), OPEL Corsa B Hatchback (S93) 1.4 (F08, F68, M68) … View more
The steps may slightly vary depending on the car design.
How to change Suspension Strut Mount on OPEL CORSA B TUTORIAL | AUTODOC

All the parts you need to replace – Strut Mount for Corsa B Hatchback (S93) and other OPEL models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 13
Drive socket # 18
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Hydraulic strut spring compressor
Fender cover
Wheel chock
Replacement: strut mount – Opel Corsa S93. AUTODOC recommends:
- The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
- All mounts of the front shock struts should be replaced simultaneously.
- Please note: all work on the car – Opel Corsa S93 – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: strut mount – Opel Corsa S93. Tip from AUTODOC:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 8Remove the fastening bolts.Step 9
Disconnect the steering knuckle from the shock absorber strut. - Step 10
Lower the car. - Step 11
Open the bonnet. - Step 12
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car. - Step 13Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.Step 14
Unscrew the top fastening of the shock strut mount. Use a drive socket #13. Use a ratchet wrench.AUTODOC recommends:Opel Corsa S93 – To avoid injury, hold the suspension strut while unscrewing the fastening bolts. - Step 15
Remove the suspension strut. - Step 16
Set the shock absorber strut on the spring compressor tool.Replacement: strut mount – Opel Corsa S93. AUTODOC experts recommend:Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles. - Step 17
Compress the spring. - Step 18
Treat the shock strut rod. Use a wire brush. Use WD-40 spray. - Step 19
Remove the strut piston rod nut. Use a flat screwdriver. Use a drive socket #19. Use a ratchet wrench. - Step 20
Remove the top strut mount.Replacement: strut mount – Opel Corsa S93. Tip:Examine the shock absorber dust cap and the bump stop. Replace them if necessary. - Step 21
Install a new top shock strut mount. - Step 22
Tighten the shock strut piston rod nut. Use a flat screwdriver. Use a drive socket #19. Use a torque wrench. Tighten it to 55 Nm torque.Replacement: strut mount – Opel Corsa S93. Professionals recommend:Check to make sure the spring is positioned correctly. Avoid its misalignment. - Step 23
Decompress the spring.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Corsa B Hatchback (S93) model
Popular maintenance tutorials for Opel Corsa S93
Complete guides for changing the Strut mount on different OPEL CORSA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Corsa B Hatchback (S93)
View more
Deep interior cleaning | Car transformation by detailing
How to repair a bumper yourself | AUTODOC tips
DIY engine block coffee table
TOP 6 WD-40 lifehacks | AUTODOC tips
Most commonly replaced car parts on OPEL CORSA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























