Disclaimer
How to change rear suspension lower trailing arm on SKODA Octavia II Combi (1Z5) – replacement guide
downloads:
7
Views:
65
Important!
This replacement procedure can be used for:
SKODA Octavia II Combi (1Z5) 2.0 TDI 4x4, SKODA Octavia II Combi (1Z5) 1.6 TDI 4x4, SKODA Octavia II Combi (1Z5) 1.6 LPG, SKODA Octavia II Combi (1Z5) 2.0 TDI 16V 4x4, SKODA Octavia II Combi (1Z5) 1.4, SKODA Octavia II Combi (1Z5) 1.8 TSI 4x4, SKODA Octavia II Combi (1Z5) 1.8 TSI, SKODA Octavia II Combi (1Z5) 2.0 TDI, SKODA Octavia II Combi (1Z5) 1.6, SKODA Octavia II Combi (1Z5) 1.6 FSI, SKODA Octavia II Combi (1Z5) 1.9 TDI, SKODA Octavia II Combi (1Z5) 2.0 TDI 16V, SKODA Octavia II Combi (1Z5) 2.0 FSI, SKODA Octavia II Combi (1Z5) 2.0 FSI 4x4, SKODA Octavia II Combi (1Z5) 1.9 TDI 4x4, SKODA Octavia II Combi (1Z5) 2.0 TFSI, SKODA Octavia II Combi (1Z5) 2.0 TDI 4x4, SKODA Octavia II Combi (1Z5) 2.0 TDI, SKODA Octavia II Combi (1Z5) 1.4, SKODA Octavia II Combi (1Z5) 2.0 TDI RS, SKODA Octavia II Combi (1Z5) 1.8 TSI, SKODA Octavia II Combi (1Z5) 2.0 TDI 16V, SKODA Octavia II Combi (1Z5) 1.6 MultiFuel, SKODA Octavia II Combi (1Z5) 1.6 TDI, SKODA Octavia II Combi (1Z5) 1.4 TSI, SKODA Octavia II Combi (1Z5) 1.8 TSI 4x4, SKODA Octavia II Combi (1Z5) 1.2 TSI … View more
The steps may slightly vary depending on the car design.
SKODA Octavia II Combi (1Z5) 2.0 TDI 4x4, SKODA Octavia II Combi (1Z5) 1.6 TDI 4x4, SKODA Octavia II Combi (1Z5) 1.6 LPG, SKODA Octavia II Combi (1Z5) 2.0 TDI 16V 4x4, SKODA Octavia II Combi (1Z5) 1.4, SKODA Octavia II Combi (1Z5) 1.8 TSI 4x4, SKODA Octavia II Combi (1Z5) 1.8 TSI, SKODA Octavia II Combi (1Z5) 2.0 TDI, SKODA Octavia II Combi (1Z5) 1.6, SKODA Octavia II Combi (1Z5) 1.6 FSI, SKODA Octavia II Combi (1Z5) 1.9 TDI, SKODA Octavia II Combi (1Z5) 2.0 TDI 16V, SKODA Octavia II Combi (1Z5) 2.0 FSI, SKODA Octavia II Combi (1Z5) 2.0 FSI 4x4, SKODA Octavia II Combi (1Z5) 1.9 TDI 4x4, SKODA Octavia II Combi (1Z5) 2.0 TFSI, SKODA Octavia II Combi (1Z5) 2.0 TDI 4x4, SKODA Octavia II Combi (1Z5) 2.0 TDI, SKODA Octavia II Combi (1Z5) 1.4, SKODA Octavia II Combi (1Z5) 2.0 TDI RS, SKODA Octavia II Combi (1Z5) 1.8 TSI, SKODA Octavia II Combi (1Z5) 2.0 TDI 16V, SKODA Octavia II Combi (1Z5) 1.6 MultiFuel, SKODA Octavia II Combi (1Z5) 1.6 TDI, SKODA Octavia II Combi (1Z5) 1.4 TSI, SKODA Octavia II Combi (1Z5) 1.8 TSI 4x4, SKODA Octavia II Combi (1Z5) 1.2 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for Octavia II Combi (1Z5) and other SKODA models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 15
Drive socket # 16
Drive socket # 18
Combination spanner #16
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Torque wrench
Pin punch
Hammer
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower trailing arm – SKODA OCTAVIA Combi (1Z5). Tip from AUTODOC experts:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: rear suspension lower trailing arm – SKODA OCTAVIA Combi (1Z5). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: rear suspension lower trailing arm – SKODA OCTAVIA Combi (1Z5). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Support the arm. Use a hydraulic transmission jack. - Step 7
Clean the control arm fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Disconnect the transverse stabilizer fastener from the link. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench. - Step 9
Remove the retaining clip of the parking brake cable. Use a pin punch. Use a hammer. - Step 10
Undo the bracket attaching the parking brake cable to the trailing arm. - Step 11
Unscrew the fastener connecting the control arm to the rear knuckle. Use a drive socket #18. Use a tap wrench. - Step 12
Unscrew the fastener connecting the trailing arm to the car body. Use a drive socket #15. Use a ratchet wrench. - Step 13
Remove the arm. - Step 14
Unscrew the bracket fastening to the arm. Use a drive socket #18. Use a ratchet wrench. - Step 15
Remove the bracket from the arm. - Step 16
Fit the new suspension trailing arm into the bracket. Use a drive socket #18. Use a torque wrench. Tighten it to 90 Nm torque.+90°AUTODOC recommends:Important! Be sure to use new fasteners. - Step 17
Install a new arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Octavia II Combi (1Z5) model
Popular maintenance tutorials for Skoda Octavia Mk2 Estate
Complete guides for changing the Control arm on different SKODA OCTAVIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA Octavia II Combi (1Z5)
View more
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
Which Coolant is Best? Comparison Test | AUTODOC
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
5 more brake repair mistakes | Stop making these brake repair mistakes
Most commonly replaced car parts on SKODA OCTAVIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
































