Important!
This replacement procedure can be used for:
SKODA OCTAVIA (1Z3) 1.6 LPG, SKODA OCTAVIA (1Z3) 1.8 TSI, SKODA OCTAVIA (1Z3) 2.0 TDI, SKODA OCTAVIA (1Z3) 1.9 TDI, SKODA OCTAVIA (1Z3) 2.0 TDI 16V, SKODA OCTAVIA (1Z3) 1.4, SKODA OCTAVIA (1Z3) 1.6, SKODA OCTAVIA (1Z3) 1.6 FSI, SKODA OCTAVIA (1Z3) 2.0 FSI, SKODA OCTAVIA (1Z3) 2.0 TFSI, SKODA OCTAVIA (1Z3) 1.4, SKODA OCTAVIA (1Z3) 2.0 TDI, SKODA OCTAVIA (1Z3) 2.0 TDI RS, SKODA OCTAVIA (1Z3) 1.8 TSI, SKODA OCTAVIA (1Z3) 2.0 TDI, SKODA OCTAVIA (1Z3) 1.6 MultiFuel, SKODA OCTAVIA (1Z3) 1.6 TDI, SKODA OCTAVIA (1Z3) 1.4 TSI, SKODA OCTAVIA (1Z3) 1.2 TSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for OCTAVIA (1Z3) and other SKODA models
Tools
Replacement: rear suspension lower trailing arm – SKODA OCTAVIA (1Z3). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 15
Drive socket # 16
Drive socket # 18
Combination spanner #16
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Torque wrench
Pin punch
Hammer
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower trailing arm – SKODA OCTAVIA (1Z3). Tip from AUTODOC experts:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: rear suspension lower trailing arm – SKODA OCTAVIA (1Z3). Recommended sequence of steps:
  1. Step 1
    How to change Control Arm on Skoda Octavia Mk2 2004 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace SKODA OCTAVIA (1Z3) 1.9 TDI 2005 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Skoda Octavia Mk2 1.6 2006 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear suspension lower trailing arm – SKODA OCTAVIA (1Z3). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on SKODA OCTAVIA (1Z3) 2.0 TDI 16V 2007 by yourself
    Remove the wheel.
  5. Step 6
    How to remove SKODA OCTAVIA 1.6 FSI 2008 Control Arm - online easy-to-follow instructions
    Support the arm. Use a hydraulic transmission jack.
  6. Step 7
    How to replace Control Arm on SKODA OCTAVIA (1Z3) 2009: download PDF manuals and video instructions
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Skoda Octavia Mk2 2.0 TDI RS 2010 - download illustrated guide
    Disconnect the transverse stabilizer fastener from the link. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Control Arm on SKODA OCTAVIA 2011? This free workshop manual will help you to do it yourself
    Remove the retaining clip of the parking brake cable. Use a pin punch. Use a hammer.
  9. Step 10
    Changing of Control Arm on Skoda Octavia Mk2 2012 won't be an issue if you follow this illustrated step-by-step guide
    Undo the bracket attaching the parking brake cable to the trailing arm.
  10. Step 11
    SKODA OCTAVIA 2.0 FSI Control Arm replacement: online guides and video tutorials
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a drive socket #18. Use a tap wrench.
  11. Step 12
    Replacing Control Arm on Skoda Octavia Mk2 2004 1.9 TDI by yourself
    Unscrew the fastener connecting the trailing arm to the car body. Use a drive socket #15. Use a ratchet wrench.
  12. Step 13
    OCTAVIA (1Z3) 1.6 FSI 2005 Control Arm DIY replacement workshop manual
    Remove the arm.
  13. Step 14
    How to change Control Arm on SKODA OCTAVIA (1Z3) 2006 - tips and tricks
    Unscrew the bracket fastening to the arm. Use a drive socket #18. Use a ratchet wrench.
  14. Step 15
    Step-by-step recommendations for DIY replacement Skoda Octavia Mk2 2007 1.6 FSI Control Arm
    Remove the bracket from the arm.
  15. Step 16
    DIY replacement of Control Arm on SKODA OCTAVIA (1Z3) 1.6 TDI 2008 is not an issue anymore with our step-by-step tutorial
    Fit the new suspension trailing arm into the bracket. Use a drive socket #18. Use a torque wrench. Tighten it to 90 Nm torque.+90°
    AUTODOC recommends:
    Important! Be sure to use new fasteners.
  16. Step 17
    How to change Control Arm on Skoda Octavia Mk2 2004 - free PDF and video manuals
    Install a new arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Octavia II Hatchback (1Z3) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SKODA OCTAVIA (1Z3) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SKODA OCTAVIA (1Z3) Control Arm replacement - online guide
Tips & tricks for your SKODA OCTAVIA (1Z3)
View more
  • How to change Control arm on SKODA OCTAVIA (1Z3) 1.6 TDI - replacement tricks
    How to check your head gasket | AUTODOC
  • Changing Wishbone Skoda Octavia Mk2 1.9 TDI - Replacement Tips
    How to choose the right engine oil for your car | AUTODOC
  • Maintenance Hacks - SKODA OCTAVIA (1Z3) 1.6 Control arms replacement guide
    How to fix your car with AUTODOC CLUB
  • Replace Trailing arm on Skoda Octavia Mk2 - free video tips
    DIY car soundproofing | AUTODOC tips