
Disclaimer
How to change front lower arm on OPEL VECTRA B Estate (31_) – replacement guide
downloads:
1
Views:
17
Important!
This replacement procedure can be used for:
OPEL VECTRA B Estate (31_) 1.6 i (F35), OPEL VECTRA B Estate (31_) 1.6 i 16V (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) 2.0 i 16V (F35), OPEL VECTRA B Estate (31_) 2.5 i V6 (F35), OPEL VECTRA B Estate (31_) 2.0 DI 16V (F35), OPEL VECTRA B Estate (31_) 2.0 DTI 16V (F35), OPEL VECTRA B Estate (31_) 2.2 DTI 16V (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) i 500 2.5 (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) 2.2 DTI 16V (F35), OPEL VECTRA B Estate (31_) 2.2 i 16V (F35), OPEL VECTRA B Estate (31_) 2.6 i V6 (F35), OPEL VECTRA B Estate (31_) 1.6 i (F35), OPEL VECTRA B Estate (31_) 2.0 i (F35), OPEL VECTRA B Estate (31_) 1.7 TD (F35), OPEL VECTRA B Estate (31_) 2.0 i 16V (F35), OPEL VECTRA B Estate (31_) 2.2 i 16V (F35) … View more
The steps may slightly vary depending on the car design.
OPEL VECTRA B Estate (31_) 1.6 i (F35), OPEL VECTRA B Estate (31_) 1.6 i 16V (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) 2.0 i 16V (F35), OPEL VECTRA B Estate (31_) 2.5 i V6 (F35), OPEL VECTRA B Estate (31_) 2.0 DI 16V (F35), OPEL VECTRA B Estate (31_) 2.0 DTI 16V (F35), OPEL VECTRA B Estate (31_) 2.2 DTI 16V (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) i 500 2.5 (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) 2.2 DTI 16V (F35), OPEL VECTRA B Estate (31_) 2.2 i 16V (F35), OPEL VECTRA B Estate (31_) 2.6 i V6 (F35), OPEL VECTRA B Estate (31_) 1.6 i (F35), OPEL VECTRA B Estate (31_) 2.0 i (F35), OPEL VECTRA B Estate (31_) 1.7 TD (F35), OPEL VECTRA B Estate (31_) 2.0 i 16V (F35), OPEL VECTRA B Estate (31_) 2.2 i 16V (F35) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for VECTRA B Estate (31_) and other OPEL models
Suspension arm
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Flat chisel
Rubber mallet
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – OPEL VECTRA B Estate (31_). AUTODOC recommends:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: front lower arm – OPEL VECTRA B Estate (31_). Take the following steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: front lower arm – OPEL VECTRA B Estate (31_). Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
- Step 8Remove the fastening bolt.
- Step 9Unscrew the front arm fastener. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
- Step 10Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #18 (2 pieces).
- Step 11Remove the rear fastener of the control arm.
- Step 12Release the fastener that connects the control arm ball joint to the steering knuckle. Use a flat metal-working chisel. Use a hammer.
- Step 13Disconnect the lower arm from the steering knuckle.
- Step 14Remove the front fastener of the control arm.
- Step 15Remove the arm.
- Step 16Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
- Step 17Install a new arm. Use a rubber mallet. Use a crowbar.Replacement: front lower arm – OPEL VECTRA B Estate (31_). AUTODOC experts recommend:During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
- Step 18Install the control arm fasteners.
- Step 19Connect the lower arm to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Vectra B Estate (J96) model
Popular maintenance tutorials for Opel Vectra B Estate
Complete guides for changing the Control arm on different OPEL VECTRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL VECTRA B Estate (31_)
View more
- Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
- 5 more brake repair mistakes | Stop making these brake repair mistakes
- Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
- How to Make a DIY Foam Sprayer | AUTODOC tips
Most commonly replaced car parts on OPEL VECTRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME