Replacement: engine mounts – RENAULT Megane I Kasten / Schrägheck (SA0/1_). AUTODOC experts recommend:
All work should be done with the engine stopped.
Replacement: engine mounts – RENAULT Megane I Kasten / Schrägheck (SA0/1_). Recommended sequence of steps:
Step 1
Open the hood.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Support the engine in the oil pan area. Use a jack.
Step 4
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
Step 5
Unscrew the fasteners of the engine mount bracket. Use a drive socket #16. Use a ratchet wrench.
Step 6
Remove the fastening bolts.
Step 7
Unscrew the engine mount from the bracket. Use a drive socket #16. Use a ratchet wrench.
Step 8
Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
Step 9
Remove the fastening bolts.
Step 10
Remove the engine mount.
Replacement: engine mounts – RENAULT Megane I Kasten / Schrägheck (SA0/1_). Professionals recommend:
Carefully check the other engine mounts and replace them if necessary.
Step 11
Detach the engine mount bracket from the mount.
Step 12
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
Replacement: engine mounts – RENAULT Megane I Kasten / Schrägheck (SA0/1_). Tip from AUTODOC:
When cleaning the mounting seats on the engine, make sure that dirt doesn't get into the valvetrain.
Step 13
Install a new engine mount.
Step 14
Install the fastening bolts.
Step 15
Fit the engine mount bracket.
Step 16
Install the fastening bolts.
Step 17
Screw in the fasteners of the engine mount bracket. Use a drive socket #16. Use a ratchet wrench.
Step 18
Screw in the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
Step 19
Screw the new engine mount to the bracket. Use a drive socket #16. Use a ratchet wrench.
Step 20
Tighten the fasteners that connect the bracket to the engine mount. Use a drive socket #16. Use a ratchet wrench. Use a torque wrench. Tighten it to 40 nm torque.
Step 21
Tighten the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a torque wrench. Tighten it to 62 Nm torque.
Step 22
Tighten the fasteners on the engine mount bracket. Use a drive socket #16. Use a torque wrench. Tighten it to 62 Nm torque.
Step 23
Remove the support from under the engine.
Step 24
Remove the fender protection cover.
Step 25
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Popular maintenance tutorials for RENAULT Megane I Kasten / Schrägheck (SA0/1_)
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your RENAULT Megane I Box Body / Hatchback (SA0/1_)
View more
How to prevent car windows from fogging up | AUTODOC tips
How to Make a DIY Foam Sprayer | AUTODOC tips
What to do if the airbag light is on | AUTODOC tips
Important differences between car tools | AUTODOC tips
Most commonly replaced car parts on RENAULT MEGANE