Important!

This replacement procedure can be used for:
VW Tiguan Allspace (BW2) 1.4 TSI, VW Tiguan Allspace (BW2) 2.0 TSI 4motion, VW Tiguan Allspace (BW2) 2.0 TDI, VW Tiguan Allspace (BW2) 2.0 TDI 4motion, VW Tiguan Allspace (BW2) 2.0 TDI 4motion, VW Tiguan Allspace (BW2) 2.0 TDI 4motion, VW Tiguan Allspace (BW2) 1.4 TSI E100 Flex, VW Tiguan Allspace (BW2) 2.0 TSI 4motion, VW Tiguan Allspace (BW2) 2.0 TSI 4motion, VW Tiguan Allspace (BW2) 2.0 TSI, VW Tiguan Allspace (BW2) 2.0 TSI 4motion, VW Tiguan Allspace (BW2) 1.5 TSI, VW Tiguan Allspace (BW2) 2.0 TSI 4motion, VW Tiguan Allspace (BW2) 2.0 TDI 4motion … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Tiguan Allspace (BW2) and other VW models

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – VW TIGUAN ALLSPACE (BW2). Tools you might need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Torque wrench
                    
                      Combination spanner #18
                    
                      Drive socket # 18 
                    
                      XZN socket bit # 6
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on VW TIGUAN ALLSPACE (BW2) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Please note: all work on the car – VW TIGUAN ALLSPACE (BW2) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW TIGUAN ALLSPACE (BW2)
Step 5

Remove the wheel.
Step 6

Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Ιnstall the transverse stabilizer link.
Step 12

Tighten the stabiliser link fastener. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
Step 13

Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use a drive socket #18. Use XZN #6. Use a torque wrench. Tighten it to 55 Nm torque.
Step 14

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use a drive socket #18. Use XZN #6. Use a torque wrench. Tighten it to 55 Nm torque.
Step 15

Treat all joints of the stabiliser link. Use copper grease.
Step 16

Clean the wheel rim mounting seat. Use a wire brush.

Step 17

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 18

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – VW TIGUAN ALLSPACE (BW2). After applying the spray, wait a few minutes.
Step 19

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. VW TIGUAN ALLSPACE (BW2)
Step 20

Screw in the wheel bolts. Use wheel impact socket #17.
Step 21

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 22

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Tiguan Allspace (BW2) model

VW TIGUAN ALLSPACE (BW2) tyre size

How to change front wheel bearing on VW Tiguan Allspace (BW2) – replacement guide

Free download PDF
2.33 MB
How to change track rod end on VW Tiguan Allspace (BW2) – replacement guide

Free download PDF
2.22 MB
How to change front brake discs on VW Tiguan Allspace (BW2) – replacement guide

Free download PDF
2.13 MB
How to change spark plugs on VW Tiguan Allspace (BW2) – replacement guide

Free download PDF
1.2 MB
How to change front windshield wipers on VW Tiguan Allspace (BW2) – replacement guide

Free download PDF
624.64 KB
How to change rear windshield wipers on VW Tiguan Allspace (BW2) – replacement guide

Free download PDF
1.59 MB

How to change rear anti roll bar links on VW TIGUAN (5N_) – replacement guide

Free download PDF
1.48 MB
How to change front anti roll bar links on VW TIGUAN (5N_) – replacement guide

Free download PDF
1.15 MB
How to change front anti roll bar links on VW Tiguan II (AD1) – replacement guide

Free download PDF
2.08 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on VW Polo 9N – replacement guide

Free download PDF
1.99 MB
How to change front anti roll bar links on VW Passat B7 saloon – replacement guide

Free download PDF
2.01 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

Checking the starter without removing it | AUTODOC tips

27K views

Published on: 01/12/2020
The Ultimate Guide to Engine Bay Cleaning | AUTODOC

6K views

Published on: 11/09/2020
5 mistakes when replacing consumables

5K views

Published on: 06/02/2025
DIY manual gearbox restoration | Drivetrain restoration – Part 3

13K views

Published on: 14/11/2024