
Disclaimer
How to change front anti roll bar links on VW Lupo 6X1 – replacement guide
downloads:
5
Views:
127
Important!
This replacement procedure can be used for:
VW Lupo (6X1, 6E1) 1.0, VW Lupo (6X1, 6E1) 1.4 16V, VW Lupo (6X1, 6E1) 1.7 SDI, VW Lupo (6X1, 6E1) 1.2 TDI 3L, VW Lupo (6X1, 6E1) 1.4 16V, VW Lupo (6X1, 6E1) 1.6 GTI, VW Lupo (6X1, 6E1) 1.4 FSI, VW Lupo (6X1, 6E1) 1.4, VW Lupo (6X1, 6E1) 1.0 … View more
The steps may slightly vary depending on the car design.
VW Lupo (6X1, 6E1) 1.0, VW Lupo (6X1, 6E1) 1.4 16V, VW Lupo (6X1, 6E1) 1.7 SDI, VW Lupo (6X1, 6E1) 1.2 TDI 3L, VW Lupo (6X1, 6E1) 1.4 16V, VW Lupo (6X1, 6E1) 1.6 GTI, VW Lupo (6X1, 6E1) 1.4 FSI, VW Lupo (6X1, 6E1) 1.4, VW Lupo (6X1, 6E1) 1.0 … View more
The steps may slightly vary depending on the car design.
How to change front anti roll bar link on VW LUPO TUTORIAL | AUTODOC

All the parts you need to replace – Anti Roll Bar Links for Lupo (6X1, 6E1) and other VW models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
Replacement: anti roll bar links – VW Lupo 6X1. Tip from AUTODOC experts:
- Replace the stabiliser links on VW Lupo 6X1 in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.
- Step 4Unscrew the wheel bolts.Replacement: anti roll bar links – VW Lupo 6X1. Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.Step 7Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #13. Use a ratchet wrench.
- Step 8Remove the stabilizer rod. Use a crowbar.
- Step 9Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.Step 10Install a new rod, tighten the fasteners. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Lupo / Lupo 3L (6X1, 6E1) model
Popular maintenance tutorials for VW Lupo 6x1
Complete guides for changing the Drop links on different VW LUPO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Lupo (6X1, 6E1)
View more
- TOP 5 mistakes during DIY oil change | AUTODOC tips
- Save Money on Fuel with These Easy Tips | AUTODOC
- Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
Most commonly replaced car parts on VW LUPO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME