How to carry out replacement: Anti Roll Bar Links 2.0 TDI 4motion VW ARTEON (3H7)
Disclaimer
Change VW ARTEON (3H7) 2.0 TSI Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on VW Arteon (3H7) – replacement guide

downloads: 4
Views: 28
Download your free tutorial and fix VW ARTEON (3H7) 2.0 TSI 4motion problems yourself Download for free 2.06 MB Anti Roll Bar Links for VW ARTEON (3H7) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VW ARTEON (3H7) 2.0 TSI 4motion, VW ARTEON (3H7) 2.0 TDI 4motion, VW ARTEON (3H7) 2.0 TDI, VW ARTEON (3H7) 2.0 TDI 4motion, VW ARTEON (3H7) 2.0 TDI, VW ARTEON (3H7) 2.0 TSI, VW ARTEON (3H7) 1.5 TSi, VW ARTEON (3H7) 2.0 TSI 4motion, VW ARTEON (3H7) 2.0 TDI, VW ARTEON (3H7) 2.0 TDI 4motion, VW ARTEON (3H7) 2.0 TDI, VW ARTEON (3H7) 1.4 eHybrid, VW ARTEON (3H7) 2.0 TSI R … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for ARTEON (3H7) and other VW models
Alternative products
How to change Anti-roll bar link on VW ARTEON (3H7) 2.0 TDI 4motion – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – VW ARTEON (3H7). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 18
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Wheel chock
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on VW ARTEON (3H7) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – VW ARTEON (3H7) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on VW ARTEON (3H7) 2017 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace VW ARTEON (3H7) 2.0 TDI 4motion 2018 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW ARTEON (3H7)
  3. Step 5
    VW ARTEON (3H7) 2.0 TDI 2019 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on VW ARTEON (3H7) 2.0 TSI 2020 by yourself
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove VW ARTEON 1.5 TSi 2021 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on VW ARTEON (3H7) 2022: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on VW ARTEON (3H7) 2.0 TDI 2023 - download illustrated guide
    Remove the stabilizer rod.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on VW ARTEON 2024? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on VW ARTEON (3H7) 2025 won't be an issue if you follow this illustrated step-by-step guide
    Ιnstall the transverse stabilizer link.
  10. Step 12
    VW ARTEON 2.0 TSI Anti Roll Bar Links replacement: online guides and video tutorials
    Tighten the stabiliser link fastener. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
  11. Step 13
    Replacing Anti Roll Bar Links on VW ARTEON (3H7) 2018 2.0 TDI 4motion by yourself
    Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use a drive socket #18. Use XZN #6. Use a torque wrench. Tighten it to 55 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Arteon (3H7) model

VW ARTEON (3H7) tyre size

Popular maintenance tutorials for VW ARTEON (3H7)

More manuals for VW ARTEON (3H7)

Complete guides for changing the Drop links on different VW ARTEON models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW ARTEON (3H7) Anti Roll Bar Links replacement - online guide
Tips & tricks for your VW ARTEON (3H7)
View more
  • How to change Drop links on VW ARTEON (3H7) 2.0 TSI 4motion - replacement tricks
    How do EGR valves work? | AUTODOC
    22K views
    Published on: 18/07/2020
  • Changing Stabilizer link VW ARTEON (3H7) 2.0 TDI 4motion - Replacement Tips
    Kolbenschmidt plastic gauge overview
    2K views
    Published on: 23/04/2025
  • Maintenance Hacks - VW ARTEON (3H7) 2.0 TDI Sway bar link replacement guide
    Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
    7K views
    Published on: 26/05/2022
  • Replace Drop link on VW ARTEON (3H7) - free video tips
    Engine Overheating? Replace Your Cooling Fan to Fix It
    6K views
    Published on: 15/11/2020

Most commonly replaced car parts on VW ARTEON

Professional manuals for the most common VW models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW ARTEON (3H7) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME