
Disclaimer
How to change front anti roll bar links on SEAT Tarraco (KN2_) – replacement guide
downloads:
7
Views:
39
Important!
This replacement procedure can be used for:
SEAT Tarraco (KN2_) 1.5 TSi ACT, SEAT Tarraco (KN2_) 2.0 TDi, SEAT Tarraco (KN2_) 2.0 TDi 4Drive, SEAT Tarraco (KN2_) 2.0 TDi 4Drive, SEAT Tarraco (KN2_) 2.0 TSi 4Drive, SEAT Tarraco (KN2_) 2.0 TDI 4Drive, SEAT Tarraco (KN2_) 2.0 TFSI 4Drive, SEAT Tarraco (KN2_) 1.4 TSI Plug in Hybrid, SEAT Tarraco (KN2_) 1.4 e-HYBRID, SEAT Tarraco (KN2_) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
SEAT Tarraco (KN2_) 1.5 TSi ACT, SEAT Tarraco (KN2_) 2.0 TDi, SEAT Tarraco (KN2_) 2.0 TDi 4Drive, SEAT Tarraco (KN2_) 2.0 TDi 4Drive, SEAT Tarraco (KN2_) 2.0 TSi 4Drive, SEAT Tarraco (KN2_) 2.0 TDI 4Drive, SEAT Tarraco (KN2_) 2.0 TFSI 4Drive, SEAT Tarraco (KN2_) 1.4 TSI Plug in Hybrid, SEAT Tarraco (KN2_) 1.4 e-HYBRID, SEAT Tarraco (KN2_) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Tarraco (KN2_) and other SEAT models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #18
Combination spanner #19
Drive socket # 18
Drive socket # 19
XZN socket bit #6
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on SEAT Tarraco (KN2_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – SEAT Tarraco (KN2_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the car.Replacement: anti roll bar links – SEAT Tarraco (KN2_). Professionals recommend:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT Tarraco (KN2_)
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use XZN #6. Use a ratchet wrench.
- Step 8Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use XZN #6. Use a ratchet wrench.
- Step 9Remove the stabiliser link.Replacement: anti roll bar links – SEAT Tarraco (KN2_). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed.
- Step 10Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 11Install a new stabiliser link and tighten the fasteners. Use a combination spanner #19. Use HEX No.H5. Use a ratchet wrench.
- Step 12Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #19. Use a torque wrench. Tighten it to 65 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Tarraco (KN2_) model
Popular maintenance tutorials for SEAT Tarraco (KN2_)
Complete guides for changing the Drop links on different SEAT TARRACO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Tarraco (KN2_)
View more
- Petrol or diesel: The engine showdown! | AUTODOC
- Kolbenschmidt plastic gauge overview
- Engine Overheating? Replace Your Cooling Fan to Fix It
- #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
Most commonly replaced car parts on SEAT TARRACO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME