Disclaimer
How to change front anti roll bar links on SEAT Mii (KF1_) – replacement guide
downloads:
3
Views:
24
Important!
This replacement procedure can be used for:
SEAT Mii (KF1_) electric, SEAT Mii (KF1_) 1.0 EcoFuel, SEAT Mii (KF1_) 1.0, SEAT Mii (KF1_) 1.0 … View more
The steps may slightly vary depending on the car design.
SEAT Mii (KF1_) electric, SEAT Mii (KF1_) 1.0 EcoFuel, SEAT Mii (KF1_) 1.0, SEAT Mii (KF1_) 1.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Mii (KF1_) and other SEAT models
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 16
Drive socket # 17
HEX bit No.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – SEAT Mii (KF1_). AUTODOC experts recommend:
- Replace the stabiliser links on SEAT Mii (KF1_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – SEAT Mii (KF1_). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. SEAT Mii (KF1_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – SEAT Mii (KF1_). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #17. Use HEX No.H5.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Mii (KF1) model
Popular maintenance tutorials for Seat Mii kf1
Free download PDF
1.9 MB
Free download PDF1.75 MB
Free download PDF1.52 MB
Free download PDF1.51 MB
Free download PDF675.84 KB
Free download PDF512 KB
Complete guides for changing the Drop links on different SEAT Mii models
Free download PDF972.8 KB
Free download PDF1.19 MB
Free download PDF1.33 MB
Free download PDF1.41 MB
Free download PDF1.41 MB
Free download PDF1.13 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Mii (KF1_)
View more
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Kolbenschmidt plastic gauge overview
Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
CHECK ENGINE light turned on – step-by-step guide on what to do
Most commonly replaced car parts on SEAT Mii
Time to replace parts? Get even better deals in our Shop app.
SCAN ME