Disclaimer
How to change front anti roll bar links on SEAT Leon Hatchback (1M1) – replacement guide
downloads:
3
Views:
24
Important!
This replacement procedure can be used for:
SEAT Leon Hatchback (1M1) 1.6, SEAT Leon Hatchback (1M1) 1.8 20V, SEAT Leon Hatchback (1M1) 1.9 TDI, SEAT Leon Hatchback (1M1) 1.9 TDI, SEAT Leon Hatchback (1M1) 1.4 16V, SEAT Leon Hatchback (1M1) 1.8 20V T, SEAT Leon Hatchback (1M1) 1.9 SDI, SEAT Leon Hatchback (1M1) 1.8 20V T 4, SEAT Leon Hatchback (1M1) 1.6 16 V, SEAT Leon Hatchback (1M1) 2.8 Cupra 4, SEAT Leon Hatchback (1M1) 1.9 TDI, SEAT Leon Hatchback (1M1) 1.8 T Cupra R, SEAT Leon Hatchback (1M1) 1.9 TDI Syncro, SEAT Leon Hatchback (1M1) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
SEAT Leon Hatchback (1M1) 1.6, SEAT Leon Hatchback (1M1) 1.8 20V, SEAT Leon Hatchback (1M1) 1.9 TDI, SEAT Leon Hatchback (1M1) 1.9 TDI, SEAT Leon Hatchback (1M1) 1.4 16V, SEAT Leon Hatchback (1M1) 1.8 20V T, SEAT Leon Hatchback (1M1) 1.9 SDI, SEAT Leon Hatchback (1M1) 1.8 20V T 4, SEAT Leon Hatchback (1M1) 1.6 16 V, SEAT Leon Hatchback (1M1) 2.8 Cupra 4, SEAT Leon Hatchback (1M1) 1.9 TDI, SEAT Leon Hatchback (1M1) 1.8 T Cupra R, SEAT Leon Hatchback (1M1) 1.9 TDI Syncro, SEAT Leon Hatchback (1M1) 1.9 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Leon Hatchback (1M1) and other SEAT models
Alternative products

Wire brush
WD-40 spray
Combination spanner #16
Drive socket # 16
Torque wrench
AUTODOC recommends:
- Replace the stabiliser links on SEAT LEON (1M1) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – SEAT LEON (1M1). Use the following procedure:
- Step 1Raise the front of the car and secure on supports.Step 2
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 3
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar and to the suspension control arm. Use a combination spanner #16. Use a torque wrench. - Step 4
Remove the stabilizer rod.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Leon I Hatchback (1M1) model
Popular maintenance tutorials for Seat Leon 1m1
Complete guides for changing the Drop links on different SEAT LEON models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Leon Hatchback (1M1)
View more
Motorcycle fuel tank restoration
How to Order Car Parts Online: Avoid These 5 Common Pitfalls
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Most commonly replaced car parts on SEAT LEON
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















