Disclaimer
How to change front anti roll bar links on SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) – replacement guide
downloads:
0
Views:
1
Important!
This replacement procedure can be used for:
SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) 1.2 TDI, SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) 1.2, SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) 1.6 TDI … View more
The steps may slightly vary depending on the car design.
SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) 1.2 TDI, SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) 1.2, SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) 1.6 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for IBIZA SPORTCOUPE Box Body / Hatchback (6J1) and other SEAT models
Anti-roll bar link
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Drive socket # 16
Drive socket # 17
HEX bit No.H5.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Replacement: anti roll bar links – SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1). AUTODOC experts recommend:
- Replace the stabiliser links on SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1). Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #17. Use HEX No.H5.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Ibiza Sportcoupe Box Body / Hatchback (6J1) model
Popular maintenance tutorials for SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1)
Free download PDF
2.13 MB
Free download PDF1.52 MB
Free download PDF1.85 MB
Free download PDF1.54 MB
Free download PDF1.38 MB
Free download PDF1.78 MB
Complete guides for changing the Drop links on different SEAT IBIZA models
Free download PDF1.32 MB
Free download PDF1.33 MB
Free download PDF1.24 MB
Free download PDF1.32 MB
Free download PDF1.31 MB
Free download PDF1 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1)
View more
7 signs of faulty fuel injectors | AUTODOC tips
How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
What causes engine misfire? | AUTODOC
5 most common causes of oil leaks | AUTODOC tips
Most commonly replaced car parts on SEAT IBIZA
Time to replace parts? Get even better deals in our Shop app.
SCAN ME