Important!

This replacement procedure can be used for:
SEAT IBIZA V (KJ1) 1.0, SEAT IBIZA V (KJ1) 1.0 TSI, SEAT IBIZA V (KJ1) 1.0 TSI, SEAT IBIZA V (KJ1) 1.6, SEAT IBIZA V (KJ1) 1.0, SEAT IBIZA V (KJ1) 1.5 TSI, SEAT IBIZA V (KJ1) 1.6 TDI, SEAT IBIZA V (KJ1) 1.6 TDI, SEAT IBIZA V (KJ1) 1.0 TGI, SEAT IBIZA V (KJ1) 1.6 TDI, SEAT IBIZA V (KJ1) 1.0 MPi, SEAT IBIZA V (KJ1) 1.0 TSI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – SEAT IBIZA V (KJ1). Tools you need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Combination spanner #17
                    
                      Drive socket # 16 
                    
                      Drive socket # 17 
                    
                      HEX bit No.H5.
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – SEAT IBIZA V (KJ1). AUTODOC experts recommend:

Replace the stabiliser links on SEAT IBIZA V (KJ1) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – SEAT IBIZA V (KJ1). Recommended sequence of steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the rear of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. SEAT IBIZA V (KJ1)
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #16. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – SEAT IBIZA V (KJ1). Tip from AUTODOC experts:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners. Use a combination spanner #17. Use HEX No.H5.
Step 12

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 40 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 40 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – SEAT IBIZA V (KJ1). After applying the spray, wait a few minutes.
Step 17

Install the wheel.

Replacement: anti roll bar links – SEAT IBIZA V (KJ1). AUTODOC experts recommend:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 18

Screw in the wheel bolts. Use wheel impact socket #17.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 20

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Ibiza V (KJ1) model

SEAT Ibiza KJ1 tyre size

How to change track rod end on SEAT IBIZA V (KJ1) – replacement guide

Free download PDF
1.37 MB
How to change front strut mount on SEAT IBIZA V (KJ1) – replacement guide

Free download PDF
3.41 MB
How to change rear strut mount on SEAT IBIZA V (KJ1) – replacement guide

Free download PDF
2.8 MB
How to change rear brake pads on SEAT IBIZA V (KJ1) – replacement guide

Free download PDF
1.53 MB
How to change front brake pads on SEAT IBIZA V (KJ1) – replacement guide

Free download PDF
1.38 MB
How to change rear brake discs on SEAT IBIZA V (KJ1) – replacement guide

Free download PDF
2.04 MB

How to change front anti roll bar links on SEAT Ibiza IV Hatchback (6J5, 6P1) – replacement guide

Free download PDF
1.32 MB
How to change front anti roll bar links on Seat Ibiza 6L1 – replacement guide

Free download PDF
1.33 MB
How to change front anti roll bar links on SEAT Ibiza IV Sportcoupe (6J, 6P) – replacement guide

Free download PDF
1.32 MB
How to change front anti roll bar links on SEAT Ibiza IV ST (6J8, 6P8) – replacement guide

Free download PDF
1.31 MB
How to change front anti roll bar links on SEAT Ibiza II (6K1) – replacement guide

Free download PDF
1 MB
How to change front anti roll bar links on SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) – replacement guide

Free download PDF
1.25 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

TOP 5 mistakes when replacing shock absorbers | AUTODOC tips

14K views

Published on: 15/06/2023
What to do if your check engine light is on | AUTODOC tips

19K views

Published on: 19/08/2020
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips

7K views

Published on: 05/02/2024
K2 ROTON wheel cleaner overview

4K views

Published on: 27/03/2025