Important!

This replacement procedure can be used for:
SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) 1.2, SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) 1.6 TDI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for IBIZA SPORTCOUPE Box Body / Hatchback (6J1) and other SEAT models

Alternative products

Top strut mount

Replacement: strut mount – SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1). List of the tools you'll need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Copper grease 
                    
                      Combination spanner #16
                    
                      Combination spanner #17
                    
                      Drive socket # 16 
                    
                      Torx bit T25
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Adjustable wrench
                    
                      Vice
                    
                      Hydraulic transmission jack
                    
                      Wheel chock

Buy tools

Replacement: strut mount – SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1). AUTODOC experts recommend:

The replacement procedure is identical for the mounts of the right and left shock absorbers of the rear suspension.
Both mounts of the rear shock struts should be replaced simultaneously.
Be sure to replace all self-locking nuts and bolts during installation.
All work should be done with the engine stopped.

Replacement: strut mount – SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1). Take the following steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the rear of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1)
Step 5

Remove the wheel.
Step 6

Unscrew and remove the wheel arch cover fasteners. Use Torx T25.
Step 7

Remove the wheel arch cover.
Step 8

Secure the rear axle beam. Use a hydraulic transmission jack.
Step 9

Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
Step 10

Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
Step 11

Unscrew the upper fastener of the shock absorber. Use a drive socket #16. Use a ratchet wrench.

AUTODOC recommends:
SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) – To avoid injury, hold the shock absorber while unscrewing the fastening bolts.
Step 12

Remove the shock absorber.
Step 13

Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray.
Step 14

Grip the shock absorber in a vice.
Step 15

Remove the shock absorber piston rod fastening. Use a combination spanner #17. Use an adjustable wrench.
Step 16

Release the vice and take out the shock absorber.
Step 17

Remove the shock absorber mount, boot and bump stop.

Replacement: strut mount – SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1). Tip from AUTODOC experts:
Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
Step 18

Install the new mount, boot, and bump stop on the shock absorber.
Step 19

Grip the shock absorber in a vice.
Step 20

Screw the shock strut piston rod upper fastening. Use a combination spanner #17. Use an adjustable wrench. Use a torque wrench. Tighten it to 25 Nm torque.
Step 21

Release the vice and take out the shock absorber.
Step 22

Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
Step 23

Treat the shock absorber mounting seats. Use copper grease.
Step 24

Place the shock absorber in the wheel arch and secure it.

AUTODOC recommends:
Important! Hold the shock absorber while screwing in the fastening bolts. SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1)
Step 25

Tighten the top shock absorber fastening. Use a drive socket #16. Use a torque wrench. Tighten it to 30 Nm torque.+90°

AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 26

Treat the shock absorber fasteners. Use copper grease.
Step 27

Clean the shock absorber mounting seats. Use WD-40 spray.

Step 28

Tighten the lower fastener of the shock absorber. Use a drive socket #16. Use a combination spanner #16. Use a torque wrench. Tighten it to 40 Nm torque.+90°

AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 29

Remove the mounting from under the rear axle beam.

AUTODOC recommends:
Replacement: strut mount – SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 30

Install the wheel arch cover to its mounting seat.
Step 31

Install and tighten the wheel arch cover fasteners. Use Torx T25.
Step 32

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.
Step 33

Install the wheel.

Replacement: strut mount – SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1). Tip from AUTODOC experts:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 34

Screw in the wheel bolts. Use wheel impact socket #17.
Step 35

Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 120 nm torque.
Step 36

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Ibiza Sportcoupe Box Body / Hatchback (6J1) model

SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) tyre size

How to change track rod end on SEAT Ibiza Sportcoupe Box Body / Hatchback (6J1) – replacement guide

Free download PDF
1.52 MB
How to change front anti roll bar links on SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) – replacement guide

Free download PDF
1.25 MB
How to change rear wheel bearing on SEAT Ibiza Sportcoupe Box Body / Hatchback (6J1) – replacement guide

Free download PDF
1.85 MB
How to change rear brake pads on SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) – replacement guide

Free download PDF
1.54 MB
How to change front brake pads on SEAT IBIZA SPORTCOUPE Box Body / Hatchback (6J1) – replacement guide

Free download PDF
1.38 MB
How to change front brake discs on SEAT Ibiza Sportcoupe Box Body / Hatchback (6J1) – replacement guide

Free download PDF
1.78 MB

How to change rear strut mount on SEAT Ibiza IV Hatchback (6J5, 6P1) – replacement guide

Free download PDF
2.06 MB
How to change front strut mount on SEAT Ibiza IV Hatchback (6J5, 6P1) – replacement guide

Free download PDF
2.8 MB
How to change front strut mount on Seat Ibiza 6L1 – replacement guide

Free download PDF
3.83 MB
How to change rear strut mount on Seat Ibiza 6L1 – replacement guide

Free download PDF
2.02 MB
How to change front strut mount on SEAT IBIZA V (KJ1) – replacement guide

Free download PDF
3.41 MB
How to change rear strut mount on SEAT IBIZA V (KJ1) – replacement guide

Free download PDF
2.8 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

How to prevent car windows from fogging up | AUTODOC tips

13K views

Published on: 04/02/2021
#DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit

8K views

Published on: 14/12/2023
How to unlock your car without a key | AUTODOC tips

1M views

Published on: 15/09/2022
How to Get the Best Deals on Car Parts | Save Money with AUTODOC

2K views

Published on: 03/02/2022