Disclaimer
How to change front anti roll bar links on SEAT Cordoba Vario (6K5) – replacement guide
downloads:
0
Views:
0
Important!
This replacement procedure can be used for:
SEAT Cordoba Vario (6K5) 1.4 i, SEAT Cordoba Vario (6K5) 1.6 i … View more
The steps may slightly vary depending on the car design.
SEAT Cordoba Vario (6K5) 1.4 i, SEAT Cordoba Vario (6K5) 1.6 i … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Cordoba Vario (6K5) and other SEAT models
Anti-roll bar link
Rod / Strut, wheel suspension
Repair Kit, stabilizer suspension
Repair Kit, stabilizer coupling rod
Mounting, stabilizer coupling rod
Alternative products
Anti-roll bar link
Rod / Strut, wheel suspension
Repair Kit, stabilizer suspension
Repair Kit, stabilizer coupling rod
Mounting, stabilizer coupling rod
Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on SEAT CORDOBA Vario (6K5) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – SEAT CORDOBA Vario (6K5). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT CORDOBA Vario (6K5) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #13. Use a ratchet wrench. - Step 8
Remove the stabilizer rod. Use a crowbar.Replacement: anti roll bar links – SEAT CORDOBA Vario (6K5). AUTODOC recommends:Examine stabiliser bushes. Replace them if needed. - Step 9
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Córdoba I Vario (6K5) model.
Popular maintenance tutorials for Seat Cordoba 6K5
Free download PDF
1.94 MB
Free download PDF4.06 MB
Free download PDF3.75 MB
Free download PDF2.37 MB
Free download PDF1.35 MB
Free download PDF1.53 MB
Complete guides for changing the Drop links on different SEAT CORDOBA models
Free download PDF1.32 MB
Free download PDF972.8 KB
Free download PDF1.19 MB
Free download PDF1.33 MB
Free download PDF1.41 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your SEAT Cordoba Vario (6K5)
View more
How to remove rust | AUTODOC tips
What to do if your car's air conditioning isn't working properly | AUTODOC tips
Petrol or diesel? What's the difference between these engines? | AUTODOC
5 car interior cleaning mistakes | AUTODOC tips
